|
|
PDF ESDALC6V1-1U2 Data sheet ( Hoja de datos )
| Número de pieza | ESDALC6V1-1U2 | |
| Descripción | TVS Clamping Arrays | |
| Fabricantes | ST Microelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ESDALC6V1-1U2 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
ESDALC6V1-1U2
Single-line low capacitance Transil™ for ESD protection
Features
■ Breakdown voltage VBR = 6.1 V min.
■ Unidirectional device
■ Multiple ESD strike sustainability
■ Very low diode capacitance: 12 pF typ. at 0 V
■ Low leakage current
■ 0201 SMD package size compatible
■ Ultra small PCB area: 0.18 mm2
■ RoHS compliant
Benefits
■ High ESD protection level
■ High integration
■ Suitable for high density boards
■ MSL1
Complies with the following standards:
■ IEC 61000-4-2 level 4
Applications
Where transient overvoltage protection in ESD
sensitive equipment is required, such as:
■ Portable multimedia players and accessories
■ Notebooks
■ Digital cameras and camcorders
■ Communication systems
■ Cellular phone handsets and accessories
ST0201 package
Figure 1. Functional diagram (top view)
Description
The ESDALC6V1-1U2 is a unidirectional single
line TVS diode designed to protect the data lines
or other I/O ports against ESD transients.
The device is ideal for applications where both
reduced line capacitance and board space saving
are required.
TM: Transil is a trademark of STMicroelectronics
October 2008
Rev 1
1/11
www.st.com
1 page  
www.DataSEhSeeDt4AUL.cCom6V1-1U2
2 Ordering information scheme
Figure 10. Ordering information scheme
Ordering information scheme
ESD Array
Low capacitance
Breakdown Voltage
6V1 = 6.1 V min
Package
U2 = ST0201
ESDA LC 6V1 - 1U2
5/11
5 Page 
www.DataSEhSeeDt4AUL.cCom6V1-1U2
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet ESDALC6V1-1U2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ESDALC6V1-1U2 | TVS Clamping Arrays | ST Microelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |