|
|
PDF STX-RLINK Data sheet ( Hoja de datos )
| Número de pieza | STX-RLINK | |
| Descripción | Raisonances in-circuit debugger/programmer | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STX-RLINK (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
STX-RLINK
Raisonance’s in-circuit debugger/programmer
for ST7, uPSD, STR7 and STR9
The RLink (STX-RLINK) is Raisonance’s
versatile, low-cost, in-circuit debugger and
programmer for ST7, uPSD, STR7 and STR9
microcontrollers. It connects to application or
evaluation boards for in-circuit programming and
debugging via an industry standard JTAG
connection for ARM® core-based and uPSD
microcontrollers, or via STMicroelectronic’s In-
Circuit Communication (ICC) connection for ST7
microcontrollers.
RLink driven by Raisonance’s RIDE integrated
development environment provides both in-circuit
debugging and programming of applications for
ST7 and uPSD, and in-circuit programming of
STR7/9 microcontrollers. In combination with
Raisonance’s free RFlasher programming
software, RLink can be used as a very-low cost,
dedicated in-circuit programmer for ST7, uPSD or
STR7/9.
Architecture
RLink – Raisonance’s in-circuit debugging and
programming tool supports both JTAG and ICC
protocols and connects to your application board
via one of three adapters:
■ 10-pin ICC adapter for ST7 microcontrollers
■ 14-pin JTAG adapter for uPSD microcontrollers
■ 20-pin JTAG adapter for STR7 and STR9
microcontrollers
RIDE – Raisonance’s integrated development
environment drives the RLink and offers seamless
control of software development tools (compiler,
assembler, linker, debugger, etc.) from an intuitive
graphical interface. It offers full integration of the
relevant C/C++ toolsets, project management,
code editor and SIMICE instruction set simulator.
The optional Code Compressor, the post link code
optimizer is available for both ST7 and uPSD.
RFlasher – Raisonance’s easy-to-use device
programming interface that drives RLink, allows
Figure 1. RLink and connection adapters
you to erase, program view and verify
microcontroller memory. RFlasher also includes
automated mode for automatic execution of
programming sequences for mass programming
and project mode that allows you to save your
programming configuration.
Key Features
RLink:
■ In-circuit debugging and programming
■ Connection to application board via JTAG
standard, or ST standard ICC connection
■ USB interface to host PC
■ Powered from USB
Note: RLinks included with REva starter kits for
STR7/9 (STRxxx-SK/RAIS from ST) and
Professional Kits for STR7/9 (STX-
PRO/RAIS from ST) allow debugging of
both STR7 and STR9 microcontrollers.
June 2006
Rev 3
1/4
www.st.com
4
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet STX-RLINK.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STX-RLINK | Raisonances in-circuit debugger/programmer | STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |