DataSheetWiki


YDA144 fiches techniques PDF

YAMAHA CORPORATION - STEREO 2.1W Non-Clip DIGITAL AUDIO POWER AMPLIFIER

Numéro de référence YDA144
Description STEREO 2.1W Non-Clip DIGITAL AUDIO POWER AMPLIFIER
Fabricant YAMAHA CORPORATION 
Logo YAMAHA CORPORATION 





1 Page

No Preview Available !





YDA144 fiche technique
YDA144
D- 4N
STEREO 2.1W Non-Clip DIGITAL AUDIO POWER AMPLIFIER
Overview
YDA144 (D-4N) is a digital audio power amplifier IC with maximum output of 2.1W (RL=4)×2ch.
YDA144 has a “Pure Pulse Direct Speaker Drive Circuit” which directly drives speakers while reducing distortion of
pulse output signal and reducing noise on the signal, and realizes the highest standard low distortion rate characteristics
and low noise characteristics among digital amplifier ICs for mobile use.
In addition, circuit design with fewer external parts can be made depend on the condition of use because corresponds to
filter less.
The YDA144 features Yamaha original non-clip output control function which detects output signal clip due to the over
level input signal and suppress the output signal clip automatically. Also the non-clip output control function can adapt
the output clip caused by power supply voltage down with battery. This is the difference from the traditional AGC (Auto
Gain Control) or ALC (Auto Level Control) circuit. Attack time and release time can be freely set by external resistances
or capacitances.
The independent power-down function for L channel and R channel minimizes consumption current at standby. As for
protection function, overcurrent protection function for speaker output terminal, overtemperatue protection function for
inside of the device, and low supply voltage malfunction preventing function are prepared.
Features
Maximum output
2.1 W×2ch (VDDP=VDDA=5.0V, RL=4, THD+N=10%)
0.75 W×2ch (VDDP=VDDA=3.6V, RL=8, THD+N=10%)
Distortion Rate (THD+N)
0.03 % (VDDP=VDDA=3.6V, RL=8, Po=0.4W, 1kHz)
Residual Noise
www.DataSheet4U4.0coµmVrms (VDDP=VDDA=3.6V, Av=12dB)
Efficiency
84 % (VDDP=VDDA=3.6V, RL=8, Po=600mW)
78 % (VDDP=VDDA=3.6V, RL=8, Po=100mW)
S/N Ratio
95dB (VDDP=VDDA=3.6V, Av=12dB)
Channel separation
95dB (VDDP=VDDA=3.6V, RL=8, Av=18dB, 1kHz)
Over-current Protection function
Thermal Protection function
Low voltage Malfunction Prevention function
2ch independent power-down control function
Power-down High speed Recovery function
Package
Lead-free 16-ball WLCSP (YDA144-WZ)
Lead-free 20-pin QFN (YDA144-QZ)
YDA144 CATALOG
CATALOG No.:LSI-4DA144A30
2006.11

PagesPages 26
Télécharger [ YDA144 ]


Fiche technique recommandé

No Description détaillée Fabricant
YDA142 DIGITAL INPUT STEREO 9.5W DIGITAL AUDIO POWER AMPLIFIER YAMAHA CORPORATION
YAMAHA CORPORATION
YDA143 STEREO 15W DIGITAL AUDIO POWER AMPLIFIER YAMAHA CORPORATION
YAMAHA CORPORATION
YDA144 STEREO 2.1W Non-Clip DIGITAL AUDIO POWER AMPLIFIER YAMAHA CORPORATION
YAMAHA CORPORATION
YDA145 MONAURAL 2.1W Non-Clip DIGITAL AUDIO POWER AMPLIFIER YAMAHA CORPORATION
YAMAHA CORPORATION

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche