DataSheetWiki


IQF-4E fiches techniques PDF

Merrimac Industries - I&Q NETWORKS

Numéro de référence IQF-4E
Description I&Q NETWORKS
Fabricant Merrimac Industries 
Logo Merrimac Industries 





1 Page

No Preview Available !





IQF-4E fiche technique
IQF-4E Series
I&Q NETWORKS
Catalog and Custom Units to 300 MHz / Octave LO Bandwidth / Low Profile, Hi-Rel Package
Outline of E-Size Flatpack
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO Center Bandwidth,
Frequency, fo MHz
IQF-4E-***B 10 to 300 MHz 67% of fo
RF and Video Bandwidths are typically much greater than specified.
For complete model number, replace *** with desired LO center
frequency, fo, in MHz.
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked pins are case ground.
General Notes:
www.DataSheet4U.com
1. I & Q networks are integrated devices that produce two
quadrature-phased, equal amplitude signals when fed by
RF and LO signals.
2. With the addition of an external IF 90° Hybrid, complete
systems are formed that are useful in image rejection and
single sideband modulators.
3. These units are also excellent as phase correlators in
closed loop applications and vector modulator
sub-systems.
4. I & Q networks can also be used in digital systems as a
QPSK demodulator where it recovers two data channels
from the incoming phase information. The QPSK input is
applied to the RF port while the recovered carrier is applied
to the LO port resulting in the two independent data outputs
at the I and Q ports.
5. Merrimac I & Q networks comply with the relevant
sections of MIL-M-28837 and may be supplied screened for
29Apr96
GENERAL SPECIFICATIONS
RF and LO Input Characteristics
Impedance:
50 nom.
VSWR:
1.5 :1 max.
RF Power Level: 0 dBm nom.
LO Power Level +10 dBm nom.
I & Q Output Characteristics
Video Bandwidth: DC to 50 MHz nom.
Output Impedance: 50 nom.
Conversion Loss
(RF to I or Q): 10 dB typ.,12 dB max.
IF Balance (I to Q)
Phase:
Amplitude:
90° ±4° typ.,
90° ±5° max.
0.25 dB typ.,
0.5 dB max.
Weight, nominal: 0.32 oz (9 g)
Operating Temp: -- 55° to +85°C
RF and Video Bandwidths are typically much greater than specified.
AVAILABLE OPTIONS
Phase Balance:
Amplitude Balance:
Conversion Loss:
Narrowband LO:
90° ± 3° max.
(for narrow band)
0.2 dB max.
8 dB typ., 10 dB max.
see IQF-20 series
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531

PagesPages 1
Télécharger [ IQF-4E ]


Fiche technique recommandé

No Description détaillée Fabricant
IQF-4E I&Q NETWORKS Merrimac Industries
Merrimac Industries
IQF-4F-1500 I&Q NETWORKS Merrimac Industries
Merrimac Industries

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche