DataSheetWiki


WCMC8016V9X fiches techniques PDF

Weida Semiconductor - 8Mb (512K x 16) Pseudo Static RAM

Numéro de référence WCMC8016V9X
Description 8Mb (512K x 16) Pseudo Static RAM
Fabricant Weida Semiconductor 
Logo Weida Semiconductor 





1 Page

No Preview Available !





WCMC8016V9X fiche technique
ADVANCE INFORMATION
WCMC8016V9X
8Mb (512K x 16) Pseudo Static RAM
Features
• Wide voltage range: 2.70V–3.30V
• Access Time: 70ns
• Ultra-low active power
— Typical active current: 2.0mA @ f = 1 MHz
— Typical active current: 11mA @ f = fmax
• Ultra low standby power
• Easy memory expansion with CE, CE2, and OE features
• Automatic power-down when deselected
• CMOS for optimum speed/power
• Offered in a 48 Ball BGA Package
Functional Description[1]
The WCMC8016V9X is a high-performance CMOS pseudo
static RAM organized as 512K words by 16 bits that supports
an asynchronous memory interface. This device features
advanced circuit design to provide ultra-low active current.
This is ideal for providing More Battery Life® (MoBL®) in
portable applications such as cellular telephones. The device
can be put into standby mode reducing power consumption by
more than 99% when deselected using CE LOW, CE2 HIGH
or both BHE and BLE are HIGH. The input/output pins (I/O0
through I/O15) are placed in a high-impedance state when:
deselected (CE HIGH, CE2 LOW OE is deasserted HIGH), or
during a write operation (Chip Enabled and Write Enable WE
LOW). The device also has an automatic power-down feature
that significantly reduces power consumption by 99% when
addresses are not toggling even when the chip is selected
(Chip Enable CE LOW, CE2 HIGH and both BHE and BLE are
LOW). Reading from the device is accomplished by asserting
the Chip Enables (CE LOW and CE2 HIGH) and Output
Enable (OE) LOW while forcing the Write Enable (WE) HIGH.
If Byte Low Enable (BLE) is LOW, then data from the memory
location specified by the address pins will appear on I/O0 to
I/O7. If Byte High Enable (BHE) is LOW, then data from
memory will appear on I/O8 to I/O15. See the Truth Table for a
complete description of read and write modes
Logic Block Diagram
DATA IN DRIVERS
www.DataSheet4U.com
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
512K x 16
RAM Array
1T
I/O0–I/O7
I/O8–I/O15
COLUMN DECODER
Power -Down
Circuit
BHE
WE
OE
BLE
CE2
CE
Note:
1. For best-practice recommendations, please refer to the Cypress application note “System Design Guidelines” on http://www.cypress .com.
WeidaSemiconductor, Inc.
38-14026
Revised August 2003

PagesPages 12
Télécharger [ WCMC8016V9X ]


Fiche technique recommandé

No Description détaillée Fabricant
WCMC8016V9X 8Mb (512K x 16) Pseudo Static RAM Weida Semiconductor
Weida Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche