DataSheetWiki


OB6563 fiches techniques PDF

On-Bright Electronics - High Performance PFC Controller

Numéro de référence OB6563
Description High Performance PFC Controller
Fabricant On-Bright Electronics 
Logo On-Bright Electronics 





1 Page

No Preview Available !





OB6563 fiche technique
OB6563
High Performance PFC Controller
Product Specification
GENERAL DESCRIPTION
OB6563 is an active transition-mode (TM) power
factor correction (PFC) controller for AC-DC
switching mode power supply applications.
OB6563 features an internal start-up timer for
stand-alone applications, a one quadrant
multiplier with THD optimizer for near unity power
factor, zero current detector (ZCD) to ensure TM
operation, a current sensing comparator with built-
in leading-edge blanking, and a totem pole output
ideally suited for driving a power MOSFET.
OB6563 offers great protection coverage including
system over-voltage protection (OVP) to eliminate
runaway output voltage due to load removal, VCC
under voltage lockout (UVLO), cycle-by-cycle
current limiting, multiplier output clamping that
limit maximum peak switch current, and gate drive
output clamping for external power MOSFET
protection.
With added system open loop protection feature,
OB6563 shuts down system when the feedback
loop is open.
In OB6563, the dynamic OVP sensing current is
set to 10uA, which will decrease system standby
power greatly. When used with On-Bright PWM
controller OB2298 or Quasi-Resonant controller
OB2203 in a 150W AC/DC power design, it can
deliver <0.4W standby power at universal AC
range input.
OB6563 is offered in SOP-8 and DIP-8 packages.
TYPICAL APPLICATION
FEATURES
Transition Mode (TM) Operation
One quadrant multiplier with THD optimizer
Low Dynamic OVP Sensing Current Setting
Low Start-up Current and Operating Current
Cycle-by-Cycle Current Limiting
Internal RC Filter
Trimmed 1.5% Internal Bandgap Reference
Under Voltage Lockout with Hysteresis
Very Precise Adjustable Output Overvoltage
Protection
Internal Start-up Timer for Stand-alone
Applications
Disable Function
Totem Pole Output with High State Clamping
System Open Loop Protection
Proprietary Audio Noise Free Operation
9.5V to 28V wide range of VCC voltage
APPLICATIONS
Electronic Ballast
AC-DC SMPS
©On-Bright Electronics
Confidential
-1-
Datasheet
OB_DOC_DS_6563A3

PagesPages 13
Télécharger [ OB6563 ]


Fiche technique recommandé

No Description détaillée Fabricant
OB6561P (OB6561P / OB6563) High Performance PFC Controller GreenEngine
GreenEngine
OB6563 (OB6561P / OB6563) High Performance PFC Controller GreenEngine
GreenEngine
OB6563 High Performance PFC Controller On-Bright Electronics
On-Bright Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche