DataSheetWiki


LC78625E fiches techniques PDF

Sanyo Semicon Device - Compact Disc Player DSP

Numéro de référence LC78625E
Description Compact Disc Player DSP
Fabricant Sanyo Semicon Device 
Logo Sanyo Semicon Device 





1 Page

No Preview Available !





LC78625E fiche technique
Ordering number : EN5502
CMOS LSI
LC78625E
Compact Disc Player DSP
Overview
The LC78625E is a CMOS LSI that implements the signal
processing and servo control required by compact disc
players, laser discs, CD-V, CD-I and related products. The
LC78625E provides several types of signal processing,
including demodulation of the optical pickup EFM signal,
de-interleaving, error detection and correction, and digital
filters that can help reduce the cost of CD player units. It
also processes a rich set of servo system commands sent
from the control microprocessor. It also incorporates an
EFM-PLL circuit and a one-bit D/A converter.
This LSI is an improved version of the LC78620E. In
addition to supporting low-voltage operation, on/off
control of the de-emphasis function and use of the
bilingual function have been enabled in certain additional
modes.
Functions
• The LC78625E takes an HF signal as input, digitizes
(slices) that signal at a precise level, converts that signal
to an EFM signal, and generates a PLL clock with an
average frequency of 4.3218 MHz by comparing the
phases of that signal and an internal VCO.
• A precise reference clock and the necessary internal
timings are generated using an external 16.9344 MHz
crystal oscillator.
• Disc motor speed control using a frame phase difference
signal generated from the playback clock and the
reference clock
• Frame synchronization signal detection, protection, and
interpolation to assure stable data readout
• EFM signal demodulation and conversion to 8-bit
symbol data
• Subcode data separation from the EFM demodulated
signal and output of that data to an external
microprocessor
• Subcode Q signal output (LSB first) to a microprocessor
over the serial interface after performing a CRC error
check
• Demodulated EFM signal buffering in internal RAM to
handle up to ±4 frames of disc rotational jitter
• Demodulated EFM signal reordering in the prescribed
order for data unscrambling and de-interleaving
• Error detection, correction, and flag processing (error
correction scheme: dual C1 plus dual C2 correction)
• The LC78625E sets the C2 flags based on the C1 flags
and a C2 check, and then performs signal interpolation
or muting depending on the C2 flags. The interpolation
circuit uses a quadruple interpolation scheme. The
output value converges to the muting level when four or
more consecutive C2 flags occur.
Package Dimensions
unit: mm
3174-QFP80E
[LC78625E]
SANYO: QFP80E
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
22897HA (OT) No. 5502-1/35

PagesPages 30
Télécharger [ LC78625E ]


Fiche technique recommandé

No Description détaillée Fabricant
LC78625 Compact Disc Player DSP Sanyo Semicon Device
Sanyo Semicon Device
LC78625E Compact Disc Player DSP Sanyo Semicon Device
Sanyo Semicon Device

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche