|
|
PDF BTA208X-1000C Data sheet ( Hoja de datos )
| Número de pieza | BTA208X-1000C | |
| Descripción | High commutation three-quadrant triacs | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BTA208X-1000C (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
BTA208X-1000C
High commutation three-quadrant triacs
Rev. 02 — 4 September 2009
www.DataSheet4U.com
Product data sheet
1. Product profile
1.1 General description
Passivated high voltage, high commutation triac in a full pack, plastic package. This triac
is intended for use in motor control circuits where high blocking voltage, high static and
dynamic dV/dt as well as high dIcom/dt can occur. This device will commutate the full
rated RMS current at the maximum rated junction temperature without the aid of a
snubber.
1.2 Features and benefits
3Q technology with superior
commutation performance for
improved noise immunity
High false trigger immunity
Isolated package
Very high blocking voltage capability of
1000 V
1.3 Applications
General purpose motor control
Reversible induction motor control
1.4 Quick reference data
Table 1. Quick reference
Symbol Parameter
VDRM
repetitive peak
off-state voltage
ITSM non-repetitive peak
on-state current
IT(RMS) RMS on-state
current
Static characteristics
IGT gate trigger current
Conditions
full sine wave; Tj(init) = 25 °C;
tp = 20 ms;
see Figure 4 and 5
full sine wave; Th ≤ 73 °C;
see Figure 3, 1 and 2
VD = 12 V; IT = 0.1 A; T2+
G+; Tj = 25 °C; see Figure 7
VD = 12 V; IT = 0.1 A; T2+
G-; Tj = 25 °C; see Figure 7
VD = 12 V; IT = 0.1 A; T2-
G-; Tj = 25 °C; see Figure 7
Min Typ Max Unit
- - 1000 V
- - 65 A
- - 8A
2 6 35 mA
2 13 35 mA
2 23 35 mA
1 page  
NXP Semiconductors
BTA208X-1000C
High commutation wthrweew-q. uDadartanatStrhiaecse t 4 U . c o
5. Thermal characteristics
Table 5.
Symbol
Rth(j-h)
Rth(j-a)
Thermal characteristics
Parameter
Conditions
thermal resistance from full cycle or half cycle with heatsink
junction to heatsink compound; see Figure 6
full cycle or half cycle without heatsink
compound; see Figure 6
thermal resistance from
junction to ambient
Min Typ Max Unit
- - 4.5 K/W
- - 6.5 K/W
- 55 - K/W
10
Zth(j-h)
(K/W)
1
(1)
(2)
(3)
(4)
003aaa972
10−1
P
10−2
10−5
10−4
10−3
10−2
10−1
tp t
1 10
tp (s)
Fig 6. Transient thermal impedance from junction to heatsink as a function of pulse width
6. Isolation characteristics
Table 6.
Symbol
Visol(RMS)
Cisol
Isolation characteristics
Parameter
Conditions
RMS isolation voltage
isolation capacitance
from all terminals to external heatsink;
sinusoidal waveform; clean and dust free;
50 Hz ≤ f ≤ 60 Hz; RH ≤ 65 %; Th = 25 °C
from main terminal 2 to external heatsink;
f = 1 MHz; Th = 25 °C
Min Typ Max Unit
- - 2500 V
- 10 - pF
BTA208X-1000C_2
Product data sheet
Rev. 02 — 4 September 2009
© NXP B.V. 2009. All rights reserved.
5 of 12
5 Page 
NXP Semiconductors
BTA208X-1000C
High commutation wthwrwee.D-qatuaaSdheraetn4tUt.crioamcs
10. Legal information
10.1 Data sheet status
Document status [1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
10.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein may
be subject to export control regulations. Export might require a prior
authorization from national authorities.
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
11. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BTA208X-1000C_2
Product data sheet
Rev. 02 — 4 September 2009
© NXP B.V. 2009. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet BTA208X-1000C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BTA208X-1000B | 3Q Hi-Com Triac | NXP Semiconductors |
| BTA208X-1000C | High commutation three-quadrant triacs | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |