|
|
Número de pieza | ATR0843 | |
Descripción | 4-channel Laser Driver | |
Fabricantes | ATMEL Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ATR0843 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Features
• Current-controlled Output Current Source with 4 Input Channels
• LVDS/CMOS Compatible Inputs Channel 2, 3, and 4
• Separate Read-channel Enable (NER)
• Two Selectable Outputs for Grounded Laser Diodes
• Output Current per Channel up to 350 mA
• Total Output Current up to 500 mA
• On-chip RF Oscillator
• Control of 2 Different Swings and Frequencies by Use of 4 External
Resistors
• Oscillator Frequency Range from 200 MHz to 500 MHz
• Maximum Oscillator Current Amplitude 100 mApp
• Single 5 V Power Supply
• Small Pb-free QFN24 Package (4 mm × 4 mm)
Applications
• DVD Blue Laser
• DVD-RAM/DVD-RW/DVD+RW with CD-RW Capability
• Recordable Optical Drives
www.DataSheet4U.com
4-channel Laser
Driver with
2 Outputs and
3 LVDS Inputs,
NER Enable
Description
The ATR0843 is a laser diode driver designed to operate two differently grounded
laser diodes for DVD-RW/+RW (650 nm) and CD-RW (780 nm). The device includes
four channels for four different optical power levels. The write channels (channel 2
to 4) can be controlled either by fast LVDS (Low Voltage Differential Signaling) or by
single-ended standard CMOS logic. In case of single-ended use, each of the ENABLE
inputs (NEx or Ex) can be used, the complementary input may be left open. There is
no need for blocking or connection to a reference voltage.
The function of the read channel is to generate a continuous output current, channels
2 to 4 are designed as write channels with very fast switching speed. All channels are
summed together and routed to one of the two outputs, IOUTA or IOUTB, controlled
by the select input SELA. Each write channel (channels 2 to 4) can contribute up to
350 mA to the total output current of up to 500 mA. The read channel can contribute
up to 150 mA. Total gain of 100 (read channel) and 250 (channel 2, 3 and 4), respec-
tively, are provided between each reference current input and the selected output.
Although the reference inputs are current inputs, voltage control is possible by using
external resistors. An on-chip RF oscillator is available to reduce laser-mode hopping
noise during read mode. The oscillator current amplitude can be set independently for
the two selectable outputs with two different resistors. Oscillation is enabled by a high
signal at the ENOSC pin. Complete shut-down of the output currents is achieved by a
low signal at the ENABLE input.
In case of uncertain (balanced) enable signals, a built-in protection circuit keeps the
laser diode output current within the defined range.
ATR0843
Summary
Rev. 4820AS–DVD–09/04
1 page Ordering Information
Extended Type Number
ATR0843-PFQG
Package Information
Package
Remarks
Lead free QFN24, 4 mm × 4 mm Taped and reeled
ATR0843
www.DataSheet4U.com
4820AS–DVD–09/04
5
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet ATR0843.PDF ] |
Número de pieza | Descripción | Fabricantes |
ATR0840 | 4-channel Laser Driver | ATMEL Corporation |
ATR0841 | 4-channel Laser Driver | ATMEL Corporation |
ATR0842 | 4-channel LVDS Laser Diode Driver | ATMEL Corporation |
ATR0843 | 4-channel Laser Driver | ATMEL Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |