DataSheetWiki


1909ETI fiches techniques PDF

Maxim Integrated Products - MAX1909ETI

Numéro de référence 1909ETI
Description MAX1909ETI
Fabricant Maxim Integrated Products 
Logo Maxim Integrated Products 





1 Page

No Preview Available !





1909ETI fiche technique
19-2805; Rev 2; 9/04
EVALUATION
KIT
AVAILABLE
www.DataSheet4U.com
Multichemistry Battery Chargers with Automatic
System Power Selector
General Description
The MAX1909/MAX8725 highly integrated control ICs
simplify construction of accurate and efficient multi-
chemistry battery chargers. The MAX1909/MAX8725
use analog inputs to control charge current and volt-
age, and can be programmed by a host microcontroller
(µC) or hardwired. High efficiency is achieved through
use of buck topology with synchronous rectification.
The maximum current drawn from the AC adapter is pro-
grammable to avoid overloading the AC adapter when
supplying the load and the battery charger simultane-
ously. The MAX1909/MAX8725 provide a digital output
that indicates the presence of an AC adapter, and an
analog output that monitors the current drawn from the
AC adapter. Based on the presence or absence of the
AC adapter, the MAX1909/MAX8725 automatically select
the appropriate source for supplying power to the sys-
tem by controlling two external p-channel MOSFETs.
Under system control, the MAX1909/MAX8725 allow the
battery to undergo a relearning or conditioning cycle in
which the battery is completely discharged through the
system load and then recharged.
The MAX1909 includes a conditioning charge feature
while the MAX8725 does not. The MAX1909/MAX8725
are available in space-saving 28-pin, 5mm 5mm thin
QFN packages and operate over the extended -40°C to
+85°C temperature range. The MAX1909/MAX8725 are
now available in lead-free packages.
Applications
Notebook and Subnotebook Computers
Hand-Held Data Terminals
Pin Configuration
TOP VIEW
28 27 26 25 24 23 22
DCIN 1
LDO 2
ACIN 3
REF 4
GND/PKPRES 5
ACOK 6
MODE 7
MAX1909
MAX8725
21 DLOV
20 DLO
19 PGND
18 CSIP
17 CSIN
16 BATT
15 GND
8 9 10 11 12 13 14
THIN QFN
Features
±0.5% Accurate Charge Voltage (0°C to +85°C)
±3% Accurate Input Current Limiting
±5% Accurate Charge Current
Programmable Charge Current >4A
Automatic System Power-Source Selection
Analog Inputs Control Charge Current and
Charge Voltage
Monitor Outputs for
Current Drawn from AC Input Source
AC Adapter Presence
Up to 17.65V (max) Battery Voltage
Maximum 28V Input Voltage
Greater than 95% Efficiency
Charge Any Battery Chemistry: Li+, NiCd, NiMH,
Lead Acid, etc.
Ordering Information
PART
TEMP RANGE
MAX1909ETI
-40°C to +85°C
MAX1909ETI+
-40°C to +85°C
MAX8725ETI
-40°C to +85°C
MAX8725ETI+
-40°C to +85°C
+Denotes lead-free package.
PIN-PACKAGE
28 Thin QFN
28 Thin QFN
28 Thin QFN
28 Thin QFN
Minimum Operating Circuit
AC ADAPTER: INPUT
P3
0.01
CSSP
PDS
SRC
DCIN
CSSN
DHIV
PDL
VCTL
MAX1909
MAX8725
LDO
LDO ICTL
MODE
DLOV
ACIN
LDO IINP IINP
REF CLS
DHI
ACOK
LDO
DLO
MAX8725 ONLY
PKPRES
PGND
CSIP
CCV
CSIN
CCI
BATT
CCS REF GND
TO
EXTERNAL LOAD
SRC
P2
P1
N1 10µH
0.015
Functional Diagrams appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 30
Télécharger [ 1909ETI ]


Fiche technique recommandé

No Description détaillée Fabricant
1909ETI MAX1909ETI Maxim Integrated Products
Maxim Integrated Products

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche