|
|
PDF NR5040 Data sheet ( Hoja de datos )
| Número de pieza | NR5040 | |
| Descripción | SMD INDUCTORS LOW PROFILE TYPE | |
| Fabricantes | Taiyo Yuden | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NR5040 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called TAIYO YUDEN s official sales channel ).
It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel.
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and For-
eign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
www.DataSheet.in
notice_e-01
1 page  
■ PART NUMBERS
●NR 6020 Shielded type
Ordering code
NR 6020T 0R8N
NR 6020T 1R5N
NR 6020T 2R2N
NR 6020T 3R3N
NR 6020T 4R7N
NR 6020T 6R8N
NR 6020T 100M
NR 6020T 220M
EHS (Environmental
Hazardous
Substances)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
[μH]
0.8
1.5
2.2
3.3
4.7
6.8
10
22
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
110
93
73
55
43
30
18
11
DC Resistance
[Ω] (±20％)
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
Rated current ※）〔mA〕
Saturation current Temperature rise current
Idc1 Idc2
5,500
3,800
4,000
3,200
3,200
2,700
2,800
2,600
2,400
2,000
2,000
1,800
1,700
1,400
1,050
950
Measuring
frequency
〔kHz〕
100
●NR 6028 Shielded type
Ordering code
NR 6028T 0R9N
NR 6028T 1R5N
NR 6028T 2R2N
NR 6028T 3R0N
NR 6028T 4R7M
NR 6028T 6R0M
NR 6028T 100M
NR 6028T 150M
NR 6028T 220M
NR 6028T 330M
NR 6028T 470M
NR 6028T 680M
NR 6028T 101M
EHS (Environmental
Hazardous
Substances)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
[μH]
0.9
1.5
2.2
3.0
4.7
6.0
10
15
22
33
47
68
100
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
90
78
68
55
39
30
20
17
12
10
8
5
3
DC Resistance
[Ω] (±30％)
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
Rated current ※）〔mA〕
Saturation current Temperature rise current
Idc1 Idc2
6,600
4,600
5,000
4,200
4,200
3,700
3,600
3,400
2,700
3,000
2,500
2,500
1,900
1,900
1,600
1,800
1,300
1,400
1,100
1,100
950 920
760 770
620 660
Measuring
frequency
〔kHz〕
100
●NR 6045 Shielded type
Ordering code
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
EHS (Environmental
Hazardous
Substances)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
[μH]
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
15
22
33
47
68
100
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
110
95
80
60
45
25
15
12
10
7
6
5
4
3
DC Resistance
[Ω] (±30％)
0.014
0.016
0.018
0.021
0.024
0.031
0.038
0.047
0.077
0.115
0.145
0.220
0.330
0.500
Rated current ※）〔mA〕
Saturation current Temperature rise current
Idc1 Idc2
8,500
4,200
8,000
4,000
7,000
3,700
6,000
3,500
5,000
3,200
4,000
3,000
3,800
2,800
3,000
2,500
2,300
1,900
1,900
1,500
1,500
1,400
1,300
1,100
1,000
900
800 700
Measuring
frequency
〔kHz〕
100
●NR 8040 Shielded type
Ordering code
NR 8040T 0R9N
NR 8040T 1R4N
NR 8040T 2R0N
NR 8040T 3R6N
NR 8040T 4R7N
NR 8040T 6R8N
NR 8040T 100M
NR 8040T 150M
NR 8040T 220M
NR 8040T 330M
NR 8040T 470M
NR 8040T 680M
NR 8040T 101M
EHS (Environmental
Hazardous
Substances)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
[μH]
0.9
1.4
2.0
3.6
4.7
6.8
10
15
22
33
47
68
100
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
85
63
50
34
30
24
22
16
13
12
8
7
6
DC Resistance
[Ω] (±30％)
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
Rated current ※）〔mA〕
Saturation current Temperature rise current
Idc1 Idc2
11,000
7,800
9,000
7,000
7,400
6,300
5,300
4,900
4,700
4,100
4,000
3,700
3,400
3,100
2,700
2,400
2,200
2,200
1,900
1,700
1,500
1,400
1,200
1,100
1,000
1,000
Measuring
frequency
〔kHz〕
100
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
www.DataSheet.in
131
5 Page 
■ RELIABILITY DATA
Wound Chip power inducto（r NR, NS-series）
9. Insulation resistance : between wires
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
NR10050 Type
NS12555, NS12565, NS12575Type
10. Insulation resistance : between wire and core
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
NR10050 Type
NS12555, NS12565, NS12575Type
11. Withstanding voltage : between wire and core
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
NR10050 Type
NS12555, NS12565, NS12575Type
12. Adhesion of terminal electrode
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
NR10050 Type
Shall not come off PC board
NS12555, NS12565, NS12575Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type :
The test samples shall be soldered to the test board by the reflow.
・Applied force
: 10N to X and Y directions.
・Duration
: 5s.
・Solder cream thickness : 0.15mm.
10N, 5s
NR10050 Type :
・Applied force : 5N to X and Y directions.
・Duration
: 5s.
13. Resistance to vibration
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
Inductance change : Within ±10%
NR10050 Type
No significant abnormality in appearance.
NS12555, NS12565, NS12575Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type, NS12555, NS12565, NS12575Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
Sweeping Method
Time
10～55Hz
1.5mm (May not exceed acceleration 196m/s2)
10Hz to 55Hz to 10Hz for 1min.
X
Y For 2 hours on each X, Y, and Z axis.
Z
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
14. Solderability
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
NR10050 Type
At least 90％ of surface of terminal electrode is covered by new solder.
NS12555, NS12565, NS12575Type
【Test Method and Remarks】
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type :
Solder Temperature
Time
245±5℃
5±1.0 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
15. Resistance to soldering heat
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
Inductance change : Within ±10%
NR10050 Type
No significant abnormality in appearance.
NS12555, NS12565, NS12575Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type, NS12555, NS12565, NS12575 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
NR6020 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 250＋ー50 ℃ for 5 seconds, 2 times.
Test board thickness : 1.0mm（NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type）
1.6mm（NR10050 Type）
Test board material : glass epoxy-resin
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
www.DataSheet.in
wound0407_reli-RP2
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet NR5040.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NR5040 | SMD INDUCTORS LOW PROFILE TYPE | Taiyo Yuden |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |