|
|
PDF FS-V3x Data sheet ( Hoja de datos )
| Número de pieza | FS-V3x | |
| Descripción | Digital Fiber Optic Sensors | |
| Fabricantes | KEYENCE CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FS-V3x (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
|
No Preview Available !
NEW Digital Fiber Optic Sensor
FS-V30 Series
Fiber Optic Sensors
The New Standard in Simplicity
www.DataSheet.in
1 page  
Highest power [WORLD's BEST]
More reliable detection in harsh environments.
Longer detection distance with thin-sleeve fibers.
The FALCON IV chip provides the highest power - MEGA mode.
This power is essential for reliable detection in harsh environments.
It also increases the detection range of miniaturized fibers.
Detecting distance: 1000mm (39.37") with thin-sleeve fiber
Approx twice the distance compared with conventional models .
MEGA
ULTRA
SUPER
TURBO
FINE
2 times
2 times
4 times
0 5,000 10,000 15,000 20,000
30,000
40,000
4 times
higher received
intensity range
50,000
60,000 65,000
Detecting the position of targets using a thin fiber.
MAXIMUM DISPLAY
Set button
Automatic
calibration setting.
Highly visible dual digital display
The dual screen differentiates the size of the
setting value and current value for high visibility.
Digital trim pot
More convenient than ever
while maintaining an easy
single button operation.
Mode button
Monitor and operation
mode selection.
Output
selection button
Light-ON or Dark-ON
output selection.
5
Bright and clear
operation indicator
Twice the size of conventional indicators.
Power booster switch
Quickly switch to MEGA high-power
mode using this DIP switch.
Equipped with a Power booster switch
Power selection without a complicated procedure.
Conventional models require complicated menu operations to
select the power settings. Power settings can be adjusted using
a single DIP switch.
Fine
MEGA
The illustration shows simulated light beams
www.DataSheet.in
5 Page 
Simple sensitivity settings
FULL AUTOMATIC CALIBRATION
No need to stop targets
When detecting falling or minute targets, it is very difficult to
make sensitivity adjustments to manual fiber-optic sensors.
Fully automatic calibration is unique to digital sensors.
A suitable sensitivity is set by pressing the SET button while
the target passes through the sensiting area.
Detecting dropping targets
MAXIMUM SENSITIVITY SETTING
Ignore backgrounds
The sensitivity of the FS-V30 can be set to the maximum
level to ignore background surfaces. This feature also makes
it possible to detect targets while suppressing the influence
of dust.
Background
Background is not detected
Application modes for the 2 output type sensors
Sensor turns ON when the target enters
the sensing area
LIMIT MODE
When dust builds up on the
sensor, the maximum light
intensity will decrease. This
mode sets an alarm value
which can notify operators
when the peak level of light
intensity becomes too low.
ALARM MODE
Conventional models display “END APC” when the APC
Function ends. The FS-V30 sends an alarm signal while
displaying “END APC”. It can also be used as an
adjustment alarm output when using the DSC Function.
Received light intensity decreases without target
Alarm output value
when PEAK is selected
1 ch threshold
ON
2 ch alarm output
OFF
Time
OTHER FS SENSORS
TRIM-POT TYPE
FS-M Series
• Fine adjustment by using
a multi-turn trimmer
• Ultra-high-speed response model
FS-M1H is also available
www.DataSheet.in
TEACHING TYPE
FS-T Series
• Fully-automatic calibration by
pressing a button
• Green LED light source model
FS-T1G is also available
11
11 Page | ||
| Páginas | Total 26 Páginas | |
| PDF Descargar | [ Datasheet FS-V3x.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FS-V30 | Digital Fiber Optic Sensors | KEYENCE CORPORATION |
| FS-V3x | Digital Fiber Optic Sensors | KEYENCE CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |