DataSheetWiki


P30P42D12P1-24 fiches techniques PDF

Tyco - Definite Purpose Magnetic Contactor

Numéro de référence P30P42D12P1-24
Description Definite Purpose Magnetic Contactor
Fabricant Tyco 
Logo Tyco 





1 Page

No Preview Available !





P30P42D12P1-24 fiche technique
www.DataSheet.co.kr
DC Coil
Catalog 1308242
Issued 3-03 (PDF Rev. 5-05)
P&B
P30/P40 series
AC Coil
Definite Purpose Magnetic Contactor
30/40 Ampere Full Load
40/50 Ampere Resistive
AC & DC Coils
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
• AC and DC coils.
• Available with auxiliary switch.
• Variety of main contact terminals.
• For control of motors, power supplies, heating elements and lighting.
Contact Data @ 25°C
Arrangements: Up to 4 Form X (4PST-NO-DM)
Ratings: See contact rating table.
Material: Silver-cadmium oxide.
Expected Life: 200,000 operations at full load.
AC coil: 2 million operations, mechanical.
DC coil: 10 million operations, mechanical.
Minimum Contact Data: 3A @ 120VAC.
Main Contact Ratings
Type
P30
P40
Motor Rating in Amps, 3Ø3P or 1Ø2P
Full Load
Locked Rotor
@ 600V @ 240V @480V @ 600V
30A 180A
150A
120A
40A 240A
200A
160A
Resistive
Rating
@ 600V
40A
50A
Tungsten
Rating
@277V
40A
50A
P30 Electrical Discharge Lamp Control: 40A @ 240V (Delta), 40A @ 600V (Wye).
P40 Electrical Discharge Lamp Control: 50A @ 600V (Wye).
Type
P30
P40
Motor Rating in Horsepower
@ 120V
@ 240V
1Ø2P
3Ø3P
1Ø2P
3Ø3P
1.5HP
3HP
2HP
5HP
3HP
7.5HP
5HP
10HP
@ 440-600V
7.5HP
15HP
Auxiliary Snap-Action Switch
Arrangements: Up to 2 Form C (DPDT).
Rating: 10 amps at 120-250VAC @ 25°C.
Material: Silver.
Initial Dielectric Strength
Initial Breakdown Voltage: 2,200V rms minimum between all elements
and between all elements to ground.
Coil Data @ 25°C
Voltage: From 12 to 120VDC, and 24 to 277VAC, 50/60 Hz.
Power: DC, 7.5 W; AC, 92VA, In rush; 12 VA Sealed.
Duty Cycle: Continuous.
Insulation Class: Class A, standard, Class B available.
Initial Insulation Resistance: 100 megohms, minimum.
Coil Data
Nominal
VDC
12
24
48
120
Resistance
(Ohms ± 10%
@ 25° C)
20.8
84
334
2,110
Must
Operate*
Volts
9
18
36
90
Maximum
Operating
Volts
15
30
57
144
Nominal Coil
Current (ma) @
Nominal Voltage
577
286
144
57
AC Voltage
Rating
24
120
240
277
Nominal
50/60 Hz.
24
110/120
208/240
277
Must Operate*
50/60 Hz.
20.4
94
177
236
*Applicable for vertical mounting, but not for upside-down mounting.
Note: Coil suppression is recommended for all DC coil units, particulary 120 and
240VDC coils.
Operate Data
Must-Operate Voltage: See coil data tables.
Environmental Data
Temperature Range: –55°C to +65°C.
Mechanical Data
Mounting: Universal mounting bracket. See outline drawings.
Termination:
Contacts: Binder screw, box lug, captive pressure plate, combination
screw and dual .250” (6.35mm) quick connect, or
combination box lug and dual .250” (6.35mm) quick
connect. See Main Contact Terminal Options photo.
Coil: Combination 8-32 screw and .250” (6.35mm) quick connect.
Aux. Switch: .187” (4.75mm) quick connect.
Weight: 3 Pole Models: 25 oz. (709g) approximately.
4 Pole Models: 28 oz. (794g) approximately.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
823
Refer to inside back cover. Datasheetpdf-http://www.DataSheet4U.net/

PagesPages 3
Télécharger [ P30P42D12P1-24 ]


Fiche technique recommandé

No Description détaillée Fabricant
P30P42D12P1-24 Definite Purpose Magnetic Contactor Tyco
Tyco

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche