|
|
PDF AT102TN03-V8 Data sheet ( Hoja de datos )
| Número de pieza | AT102TN03-V8 | |
| Descripción | Display Module | |
| Fabricantes | Innolux | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AT102TN03-V8 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
|
No Preview Available !
INNOLUX DISPLAY CORPORATION
LCD MODULE
S P E C I F I C AT I O N
Customer:
Model Name:
SPEC NO.:
Date:
Version:
AT102TN03 V.8
A1 0 2 - 0 3 - T T- 8 3
2009/12/11
03
□Preliminary Specification
■Final Specification
For Customer’s Acceptance
Approved by
Comment
Approved by
Joe Lin
2009/12/15
Reviewed by
James Yu
Jack Huang
2009/12/14
Prepared by
David Lee
2009/12/11
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
1 page  
INNOLUX
SPEC NO.: A102-03-TT-83 Date :2009/12/11
Page: 2/26
2. Pin Assignment
2.1. TFT LCD Panel Driving Section
FPC connector is used for the module electronics interface. The recommended model is
“AF 730L-A2G1T” manufactured by P-TWO.
Pin No. Symbol I/O
Function
Remark
1
POL
I Polarity selection
2 STVD I/O Vertical start pulse input when U/D= H
Note 1
3
OEV
I Output enable
4
CKV
I Vertical clock
5 STVU I/O Vertical start pulse input when U/D= L
Note 1
6
GND
P Power ground
7
EDGSL
I Select rising edge or rising/falling edge
8 VCC P Power supply for digital circuit
9 V9 I Gamma voltage level 9
10 VGL P Gate OFF voltage
11 V2 I Gamma voltage level 2
12 VGH P Gate ON voltage
13 V6 I Gamma voltage level 6
14 U/D I Up/down selection
Note 1,2
15
VCOM
I Common voltage
16
GND
P Power ground
17
AVDD
P Power supply for analog circuit
18 V14 I Gamma voltage level 14
19 V11 I Gamma voltage level 11
20 V8 I Gamma voltage level 8
21 V5 I Gamma voltage level 5
22 V3 I Gamma voltage level 3
23
GND
P Power ground
24 R5 I Red data(MSB)
25 R4 I Red data
26 R3 I Red data
27 R2 I Red data
28 R1 I Red data
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
5 Page 
INNOLUX
3.1.2 Current Consumption
SPEC NO.: A102-03-TT-83 Date :2009/12/11
Page: 8/26
Item
Current for Driver
Symbol
IGH
IGL
ICC
IAVDD
Min.
Values
Typ.
Max.
Unit
Remark
- 0.3 0.5 mA VGH =16V
- 0.2 1.0 mA VGL = -7V
- 4 10 mA VCC =3.3V
- 25 50 mA AVDD =9.2V
3.1.3 Backlight Driving Conditions
Item
LED forward voltage
LED forward current
LED life time
Symbol
Values
Min. Typ. Max.
VL 8.4 9.3 10.5
IL 180 200 220
- 20,000 -
-
Unit Remark
V Note 1
mA
Hr Note 2
Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and
IL =200mA.
Note 2: The “LED life time” is defined as the module brightness decrease to 50% original
brightness at Ta=25℃ and IL =200mA. The LED lifetime could be decreased if
operating IL is larger than 200 mA.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
11 Page | ||
| Páginas | Total 29 Páginas | |
| PDF Descargar | [ Datasheet AT102TN03-V8.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AT102TN03-V1 | LCD MODULE |  INNOLUX |
| AT102TN03-V3 | Display Module | Innolux |
| AT102TN03-V8 | Display Module | Innolux |
| AT102TN03-V9 | Display Module | Innolux |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |