DataSheetWiki


LE24CBP222 fiches techniques PDF

Sanyo Semicon Device - Two Wire Serial Interface EEPROM

Numéro de référence LE24CBP222
Description Two Wire Serial Interface EEPROM
Fabricant Sanyo Semicon Device 
Logo Sanyo Semicon Device 





1 Page

No Preview Available !





LE24CBP222 fiche technique
www.DataSheet.co.kr
Ordering number : EN*A1812
LE24CBP222
CMOS IC
Power switch integrated triple port EEPROM
Two Wire Serial Interface
(2K+2K EEPROM)
Overview
The power switch integrated triple port EEPROM series consists of two independent banks, and each bank can be
controlled separately using dedicated control pins. The EEPROM also features a control port, which is a third pin
separate from the pins used for the banks, and by accessing the memory areas from this control port, the two-bank
configuration (2K bits + 2K bits) can be used as a pseudo-one-bank configuration (4K bits). Together with the 16-byte
page write function, this enables a reduction in the number of factory write processes.
Furthermore, the EEPROM has a configuration area which is separate from the 2K-bit + 2K-bit area, and by using the
settings stored in this configuration area, it is possible to change the slave address for each port and to set read/write
protection for each port.
The EEPROM also incorporates a power switch circuit with reverse current blocking diodes, supporting different
power voltages among three ports. This product incorporates SANYO's high performance CMOS EEPROM technology
and realizes high-speed operation and high-level reliability. The interface of this product is compatible with the I2C bus
protocol, making it ideal as a nonvolatile memory for small-scale parameter storage.
In addition, this product also supports DDC2TM, so it can also be used as an EDID data storage memory for display
equipment.
Functions
Capacity
: Bank1:2K bits (256 × 8 bits) + Bank2:2K bits (256 × 8 bits)
+ configuration area: 128 bits (16 × 8 bits), 4224 bits in total
Single supply voltage
Interface
: 2.7V to 5.5V. With built-in power switch circuit.
: Two wire serial interface (I2C Bus*), VESA DDC2TM compliant** 3-port access
Operating clock frequency : 400kHz (max)
Low power consumption : Standby: 40μA (max), One-bank read: 8 mA (max.)
* : I2C Bus is a trademark of Philips Corporation.
Continued on next page.
** : DDC and EDID are trademarks of Video Electronics Standard Association (VESA).
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
92910 SY No.1812-1/20
Datasheet pdf - http://www.DataSheet4U.net/

PagesPages 20
Télécharger [ LE24CBP222 ]


Fiche technique recommandé

No Description détaillée Fabricant
LE24CBP222 Two Wire Serial Interface EEPROM Sanyo Semicon Device
Sanyo Semicon Device

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche