JMB352 Datasheet PDF - JMicron
| Part Number | JMB352 | |
| Description | High-Speed USB & SATA II Combo to Dual SATA II RAID Bridge | |
| Manufacturers | JMicron | |
| Logo |  |
|
|
There is a preview and JMB352 download ( pdf file ) link at the bottom of this page. Total 3 Pages | ||
Preview 1 page No Preview Available !
JMicron/JMB352
JMB352
High-Speed USB & SATA II Combo to Dual SATA II RAID Bridge
Description
The JMB352 is a bridge controller, which translates the communication protocol between SATA II 3.0G and
Hi-Speed USB commands. The integrated 60MIPS 8051, 3-port SATA II 3.0G and Hi-Speed USB technology
enable users to perform Hi-Speed USB to dual SATA II 3.0G, and eSATA II 3.0G to dual SATA II 3.0G applications
in a signal chip.
In this chip, the Hi-Speed USB controller supports the USB Mass Storage Class Bulk-Only Transport
Specification, and support 3 LUN applications. The SATA controller could be configured as host or device. The
3-port SATA II 3.0G controllers further supports the eSATA to dual SATA communication. Integrated these two
technologies, the user could perform JMB352 to the following applications.
¾ eSATA & Hi-Speed USB combo to dual SATA bridge application with RAID0 or RAID1 or JBOD function.
(USB Default Driver of OS)
¾ Hi-Speed USB to SATA with 3 LUN bridge application (USB Default Driver of OS)
¾ Dual eSATA & Hi-Speed USB to SATA application (USB Default Driver of OS)
¾ One-button system backup application for above 3 applications. (With SATA, USB Vender Software
www.DataSheet.co.kr
Application)
Features
Quick Reference
• Compliance with Serial ATA International
Organization: Serial ATA Revision 2.6
• Compliance with Gen1i, Gen1m, Gen2i and Gen2m of
Serial ATA International Organization: Serial ATA
Signal Bit Rate
Power Supply
GPIO Support
3.0 Gbps
3.3V and 1.2V
UP to 24
Revision 2.6
• Support SATA 1.5G/3.0G Speed Negotiation
• Support SATA II Asynchronous Signal Recovery (Hot
ESD Protection
Package
2000 V
100-pin LQFP
Plug) feature
• Support SATA Host/Device controller configuration
• Compliance with USB 2.0 electrical specification
• Support USB 2.0 High-Speed and Full-Speed
RAID Level
Support
SATA Port
RAID 0,1, JBOD, Port
Multiplier
3
Operation
USB Port
1
Version 1.2
© JMicron 2008. All rights reserved.
June 2008
Page 1
Copying prohibited.
Datasheet pdf - http://www.DataSheet4U.net/
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for JMB352 electronic component. |
| Information | Total 3 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ JMB352.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| JMB350 | The function is SATA II Port Multiplier. JMicron | |
| JMB352 | The function is High-Speed USB & SATA II Combo to Dual SATA II RAID Bridge. JMicron | |
| JMB352U | The function is High-Speed USB & SATA II Combo to Dual SATA II Port Multiplier(1 to 2) Bridge. JMicron | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
JMB3
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||