DataSheetWiki


JMB393 fiches techniques PDF

JMicron - Port Multiplier Chip

Numéro de référence JMB393
Description Port Multiplier Chip
Fabricant JMicron 
Logo JMicron 





1 Page

No Preview Available !





JMB393 fiche technique
JMB393 Port Multiplier Chip
JMicron/JMB393
1. Overview
JMicron JMB393 is a single chip, 1 to 5-ports Serial ATA II Port Multiplier with RAID function support.
It is designed to provide SATA port expansion, data protection and performance aggregation at various
applications.
JMB393 uses JMicron’s production-proven Multi-port Serial ATA PHY technology and
JMicron-proprietary storage processor to provide very high efficient SATA RAID operation. With an easy
configuration scheme, the device can be a pure port multiplier which provides SATA port expansion just like
a SATA Hub, or hard-drive performance booster which provides a high performance device seen by host
controller or hard-drive data protector which automatically backup data to prevent data loss from hard-drive
damage. JMB393 also has advance mode to provide both benefit of performance boost and data protection.
JMB393 is a self-contained storage processor chip which completely frees up the main CPU loading and
the SATA ports comply with eSATA specification, making it suitable for use in both internal system and
external storage applications
2. Compliance, Features
2.1 Compliance
Compliant with Serial ATA II Port
Multiplier Spec. Revision 1.1
Compliant with Serial ATA II PHY
Electrical Spec. Revision 1.0
Compliant with Serial ATA High Speed
Serialized AT Attachment Spec. Revision 2.5
2.2 General
Integrated 6-port SATA II PHY
Integrated PLL for SATA II interface
Total six independent SATA channel
Integrated uP, PROM and SRAM for
firmware programming
Integrated high performance RAID
storage processor
Fabricated in 0.13um CMOS Standard
Logic Process
1.3V core and 3.3V I/O power supply
Available in 64-pin QFN
2.3 SATA
Supports 6-port 3.0Gbps SATA II
www.DataSheet.co.kr
interface
Supports SATA II Gen2i and Gen2m
(External SATA Connection, eSATA)
Output swing control and automatic
impedance calibration for SATA II PHY
Supports asynchronous signal recovery
Supports spread spectrum clocking
Supports partial / slumber power saving
mode
Automatically speed negotiation for 3
Gbps or 1.5 Gbps
Supports BIST and loopback mode
Supports staggered spin-up
Supports 48-bit LBA addressing
Supports ATAPI drives
Supports Native Command Queue (NCQ)
Supports Hot-Plug
Supports Asynchronous Notification
Supports PM aware and non-PM aware
host
Copyright © 2008 JMicron Inc. All rights reserved.
Product Brief
Page 1
2008/11/03
Datasheet pdf - http://www.DataSheet4U.net/

PagesPages 3
Télécharger [ JMB393 ]


Fiche technique recommandé

No Description détaillée Fabricant
JMB390 RAID Port Multiplier Chip JMicron
JMicron
JMB391 RAID Port Multiplier Chip JMicron
JMicron
JMB392 RAID Port Multiplier Chip JMicron
JMicron
JMB393 Port Multiplier Chip JMicron
JMicron

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche