|
|
PDF ED-X12 Data sheet ( Hoja de datos )
| Número de pieza | ED-X12 | |
| Descripción | (ED-X10 / ED-X12) User MANUAL | |
| Fabricantes | Hitachi | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ED-X12 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Projector
ED-X10/ED-X12
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING ŹBefore using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
http://www.DataSheet4U.net/
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
Trademark acknowledgment
• VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
1
datasheet pdf - http://www.DataSheet4U.net/
1 page  
Ports (See below.)
Rear-Left side
Part names
Power switch ( 17)
AC inlet ( 14)
Elevator button ( 9)
Elevator foot ( 9)
Vent ( 7)
AUDIO IN1 port ( 12)
(In the default setting, the AUDIO IN1 port is the audio
port for the RGB IN1 port, however, it is possible to
AUDIO IN3 L/R port ( 13) change the settings. 36)
(In the default setting, the
AUDIO IN3 L/R port is the audio
port for the VIDEO, S-VIDEO
RGB IN1 port ( 12)
and COMPONENT VIDEO
ports, however it is possible to
Restart switch (*) ( 58)
change the settings. 36)
RGB IN2 port ( 12)
COMPONENT
VIDEO ports ( 13)
Y
CB/PB
CR/PR
VIDEO port ( 13)
AUDIO IN3
YR
CB/PB
L
CR/PR
VIDEO
S-VIDEO
RGB IN1
AUDIO IN1
AUDIO IN2
K
http://www.DataSheet4U.net/
RGB IN2
RGB OUT port ( 12)
RGB OUT AUDIO OUT
AUDIO OUT port
( 12)
CONTROL
USB
Ports
S-VIDEO port ( 13)
USB port ( 12)
AUDIO IN2 port ( 12)
(In the default setting, the AUDIO
IN2 port is the audio port for
the RGB IN2 port, however, it is
possible to change the settings.
36)
CONTROL port ( 12)
Kensington lock slot
NOTE (*) About Restart switch: This projector is controlled by an internal
microprocessor. Under certain exceptional circumstances, the projector may not
operate correctly and the microprocessor will need to be reset. In such a case,
please push the Restart switch by using a cocktail stick or similar, and before
turning on again, make the projector cool down at least 10 minutes without
operating. Only push the Restart switch in these exceptional instances.
5
datasheet pdf - http://www.DataSheet4U.net/
5 Page 
Setting up
Connecting your devices
CAUTION Ź7XUQRIIDOOGHYLFHVSULRUWRFRQQHFWLQJWKHPWRWKHSURMHFWRU
Attempting to connect a live device to the projector may generate extremely
loud noises or other abnormalities that may result in malfunction and/or damage
to the device and/or projector.
Ź8VHWKHDFFHVVRU\FDEOHRUDGHVLJQDWHGW\SHFDEOHIRUWKHFRQQHFWLRQ
Some cables have to be used with core set. A too long cable may cause a
certain picture degradation. Please consult with your dealer for details. For
cables that have a core only at one end, connect the core to the projector.
Ź0DNHVXUHWKDW\RXFRQQHFWGHYLFHVWRWKHFRUUHFWSRUW,QFRUUHFWFRQQHFWLRQ
may result in malfunction and/or damage to the device and/or projector.
NOTE • Whenever attempting to connect a laptop computer to the projector, be sure
to activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to the
instruction manual of the corresponding laptop computer.
• Secure the screws on the connectors and tighten.
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• For some RGB signal modes, the optional Mac adapter is necessary.
• When the image resolution is changed on a computer, depending on an input,
http://www.DataSheet4U.net/
automatic adjustment function may take some time and may not be completed. In this
case, you may not be able to see a check box to select “Yes/No” for the new resolution
on Windows. Then the resolution will go back to the original. It might be recommended
to use other CRT or LCD monitors to change the resolution.
About Plug-and-Play capability
Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC
2B. Plug-and-Play can be achieved by connecting this projector to a computer is VESA
DDC (display data channel) compatible.
• Please take advantage of this function by connecting the accessory RGB cable to the
RGB IN1 port (DDC 2B compatible). Plug-and-Play may not work properly if any other
type of connection is attempted.
• Please use the standard drivers in your computer as this projector is a Plug-and-Play
monitor.
11
datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet ED-X12.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ED-X10 | (ED-X10 / ED-X12) SERVICE MANUAL | Hitachi |
| ED-X10 | (ED-X10 / ED-X12) User MANUAL | Hitachi |
| ED-X12 | (ED-X10 / ED-X12) SERVICE MANUAL | Hitachi |
| ED-X12 | (ED-X10 / ED-X12) User MANUAL | Hitachi |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |