|
|
Número de pieza | HT1000 | |
Descripción | Entertainment Projector User Manual | |
Fabricantes | NEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HT1000 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! HT1000
Entertainment Projector
User’s Manual
http://www.Datasheet4U.com
1 page HT1000
Entertainment Projector
User’s Manual
English
Deutsch
Français
Italiano
Español
Svenska
5 Page Top Features
9 10
45
11
2
6 7 8 12 1
3
1. POWER Button (ON / STAND BY) ( )
Use this button to turn the power on and off when the main power is
supplied and the projector is in standby mode.
NOTE: To turn on or off the projector, press and hold this button for a mini-
mum of two seconds.
2. STATUS Indicator
If this light blinks red rapidly, it indicates that an error has occurred,
the lamp cover is not attached properly or the projector has o ver-
heated. If this light remains orange, it indicates that you have pressed
a cabinet key while the Control Panel Key Lock is enabled. See the
Status Indicator section on page E-50 for more details.
3. POWER Indicator
When this indicator is green, the projector is on; when this indicator
is orange, it is in standby or idle mode. See the Power Indicator sec-
tion on page E-50 for more details.
4. SOURCE Button
Use this button to select a video source such as aVCR, DVD player,
PC or Viewer (PC card).
Press and release this button quickly to display the Source List.
Each time this button is pressed for a minimum of ONE second the
input source will change as follows:
Video → S-Video → Component → RGB → DVI (DIGIT AL) → Viewer →
Video → ...
If no input signal is present, the input will be skipped.
5. AUTO ADJUST Button
Use this button to adjust Position-H/V and Pixel Clock/Phase for an
optimal picture. Some signals may not be displayed correctly or take
time to switch between sources.
NOTE: This function may not be available depending upon the input signal.
7. ENTER Button
Executes your menu selection and activates items selected from the
menu.
8. CANCEL Button
Press this button to exit "Menus". Press this button to return the ad-
justments to the last condition while y ou are in the adjustment or
setting menu.
9. SELECT ̆̄̇̈ (+) (–) / Volume Buttons
̆̄ : Use these buttons to select the menu of the item you wish to
adjust. When no menus appear, these buttons work as a vol-
ume control.
̇̈ : Use these buttons to change the level of a selected menu item.
A press of thë button executes the selection.When the menus
or the Viewer tool bar is not displa yed, these buttons can be
used to select a slide , or to move the cursor in F older List or
Slide List.
10. MENU Button
Displays the menu.
11. LAMP Indicator
If this light blinks red rapidly, it's warning you that the projection lamp
has exceeded 1500 hours (up to 2000 hours in Eco mode) of sevrice.
After this light appears, replace the lamp as soon as possib le. (See
page E-48). If this is lit g reen contin ually, it indicates that the lamp
mode is set to Eco. See the Lamp Indicator section on page E-50 of r
more details.
12. 3D REFORM Button
Press this button to enter 3D Refor m mode to correct the k eystone
(trapezoidal) distortion, and make the image square.
6. PC CARD Access Indicator
Lights while accessing a PC card.
E-7
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet HT1000.PDF ] |
Número de pieza | Descripción | Fabricantes |
HT1000 | Satellite Modem User Guide Manual | Hughes Network Systems |
HT1000 | Entertainment Projector User Manual | NEC |
HT1000 | GNSS Navigation Management System Pilot Guide Manual | Honeywell |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |