DataSheetWiki


WS2803 fiches techniques PDF

Worldsemi - 18-Channel Constant Current LED Driver

Numéro de référence WS2803
Description 18-Channel Constant Current LED Driver
Fabricant Worldsemi 
Logo Worldsemi 





1 Page

No Preview Available !





WS2803 fiche technique
Preliminary WS2803
18-Channel Constant Current LED Driver
With Programmable PWM Outputs
Features
Supports both constant voltage and constant current drive mode
  Constant output current range
-5-30mA@5V supply voltage
[email protected] supply voltage
18 constant current driving channels
30V high voltage output channels
8bit PWM gray level control
Precision output driving current
Between channels in a chip: ±2 %
Between chips: ±4%
Maximum clock frequency up to 25MHz.
Free run ability
Over temperature protection
Applications
LED decorative lighting
Indoor/Outdoor LED video or massage display
General Description
The WS2803 is a constant current LED driver. It is designed for indoor/ outdoor LED displays and decorative LED
lighting system. It is suitable for LED cascading applications. The WS2803 ownes 18 output channels, each channel can
drive a constant current up to 30mA. WS2081 contains serial shift registers, data latches, output registers, band gap
reference voltage generator, internal oscillator, and programmable constant output current drivers. The serial data is read
into the shift registers at the rise edge of the external clock. The data and clock output buffers are designed for cascading
another chip. The output current can be set by connect a resistor at IREF pin to set the output current of each channel. The
over temperature protection is built in to protect the chip from thermal damage, if the core temperature level rise over 120,
the output current will be decreased to stable the core temperature within a safe level. The 2-wire control scheme can
reduce the system cost; it is very suitable for low cost LED decorative LED lighting systems.
WS2803 is available in both SOP-28 and DIP-28 package, the operating temperature is -40~85
Absolute Maximum Ratings
Parameter
Symbol
Ratings
Unit
Power Supply Voltage
VCC
-0.3 to 6V
V
Input Voltage
Output Voltage
Output Pin Voltage
Output Current
Constant Current Drive Mode
Output Current Deviation
Between output channels
Between chips
Input Clock Frequency
Maximum Power Dissipation
Operating Junction Temperature
VIN
VOUT
VXOUT
VXOUT
IOUTCC
DIOI
DIOE
FCLK
PD
Topr
-0.3 to VCC+0.3V
-0.4 to 45V
-0.3 to 30VIOUT off
-0.3 to 10V
5 to 30
±2
±4
25
2600
-40 to + 150
V
V
V
V
mA
%
MHz
mW
Storage Temperature Range
Tstg -55 to + 150
Lead Temperature (Soldering, 10 seconds)
Tsolder
300
ESD susceptibility
2000
V
Note: If the voltage on the pins exceeds the maximum ratings may cause permanent damage to the device.
1/8
WS-Preliminary-V0.1
http://www.world-semi.com

PagesPages 8
Télécharger [ WS2803 ]


Fiche technique recommandé

No Description détaillée Fabricant
WS2801 3-Channel Constant Current LED Driver Worldsemi
Worldsemi
WS2803 RF Switch Wi-Sys
Wi-Sys
WS2803 18-Channel Constant Current LED Driver Worldsemi
Worldsemi

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche