DataSheetWiki


74HCT123 fiches techniques PDF

NXP Semiconductors - Dual retriggerable monostable multivibrator

Numéro de référence 74HCT123
Description Dual retriggerable monostable multivibrator
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





74HCT123 fiche technique
74HC123; 74HCT123
Dual retriggerable monostable multivibrator with reset
Rev. 10 — 3 December 2015
Product data sheet
1. General description
The 74HC123; 74HCT123 are high-speed Si-gate CMOS devices and are pin compatible
with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC
standard no. 7A.
The 74HC123; 74HCT123 are dual retriggerable monostable multivibrators with output
pulse width control by three methods:
1. The basic pulse is programmed by selection of an external resistor (REXT) and
capacitor (CEXT).
2. Once triggered, the basic output pulse width may be extended by retriggering the
gated active LOW-going edge input (nA) or the active HIGH-going edge input (nB). By
repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made
as long as desired. Alternatively an output delay can be terminated at any time by a
LOW-going edge on input nRD, which also inhibits the triggering.
3. An internal connection from nRD to the input gates makes it possible to trigger the
circuit by a HIGH-going signal at input nRD as shown in Table 3.
Schmitt-trigger action in the nA and nB inputs, makes the circuit highly tolerant to slower
input rise and fall times.
The 74HC123; 74HCT123 are identical to the 74HC423; 74HCT423 but can be triggered
via the reset input.
2. Features and benefits
DC triggered from active HIGH or active LOW inputs
Retriggerable for very long pulses up to 100 % duty factor
Direct reset terminates output pulse
Schmitt-trigger action on all inputs except for the reset input
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Specified from 40 C to +85 C and from 40 C to +125 C

PagesPages 24
Télécharger [ 74HCT123 ]


Fiche technique recommandé

No Description détaillée Fabricant
74HCT123 Dual retriggerable monostable multivibrator with reset Philips
Philips
74HCT123 Dual retriggerable monostable multivibrator NXP Semiconductors
NXP Semiconductors
74HCT123-Q100 Dual retriggerable monostable multivibrator NXP Semiconductors
NXP Semiconductors
74HCT125 Quad buffer/line driver 3-state Philips
Philips

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche