|
|
PDF ZICM2410P0-1C-SN Data sheet ( Hoja de datos )
| Número de pieza | ZICM2410P0-1C-SN | |
| Descripción | Module and Extended Range Module | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ZICM2410P0-1C-SN (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
DATA SHEET
MeshConnect™ Module Series
Module and Extended Range Module
Integrated Transceiver Modules for ZigBee / IEEE 802.15.4
Development Kits available: ZICM2410P0-KIT2-1, ZICM2410P2-KIT1-1
DESCRIPTION
CEL's MeshConnect™ Module Series provides high performance
and low cost 2.4 GHz IEEE 802.15.4 / ZigBee modules for a broad
range of wireless networks. The MeshConnect certified and quali-
fied modules, enable customer to accelerate time to market by
greatly reducing design and certification phases of development.
CEL's MeshConnect™ radio modules leverage the advanced
features of the MeshConnect™ Integrated Circuit (IC). The IC is
a true single-chip solution, compliant with ZigBee specifications
and IEEE 802.15.4, a complete wireless solution for all ZigBee
applications. The IC consists of an RF transceiver with baseband
modem, a hardwired MAC and an embedded 8051 microcon-
troller with internal Flash memory. The device provides numerous
general-purpose I/O pins, peripheral functions such as timers and
UARTs and is one of the first devices to provide an embedded
Voice CODEC. This device is also ideal for low power applications.
The original MeshConnect module delivers excellent performance
at a surprisingly low cost. The module’s +6dBm output power
means better range, more reliable transmission and fewer nodes
in your network. It also makes these modules ideal for applica-
tions where cost and power constraints do not allow for external
power amplifiers or peripheral range extension components.
The MeshConnect Extended Range module adds a power ampli-
fier (PA) and low noise amplifier (LNA) to increase range to over
two miles - plus more reliable transmission and fewer nodes in
your network. It is especially useful for open outdoor applica-
tions where the nodes are physically far apart, or for indoor use
where the nodes have to operate in a noisy RF environment. The
Extended Range Module’s outstanding +123 dBm budget link
ensures high quality connections even in such harsh environments.
ORDERING INFORMATION
MeshConnect™ Module Series
FEATURES
• 96 kB FLASH Memory
• 8 kB SRAM
• 8051 MCU core
• up to 22 GPIO Pins
• SPI (Master/Slave) + UARTs
• I2S/PCM Interface with two 128-byte FIFOs
• µ-law/a-law/ADPCM Voice Codec
• 4-channel 8-bit ADC
• High RF performance:
- Up to 123.5 dB RF Link Budget
- RX Sensitivity: -97 dBm and -103.5 dBm
- RF TX Power:+6 dBm and +20 dBm
• Scalable Data Rate: 250 kbps, 500 kbps and 1Mbps
• Miniature footprint: 1” x 1.350” (25.4 mm x 34.3 mm)
• Voice Codec Support: µ-law/a-law/ADPCM
• 4 Level Power Management Scheme w/ Deep Sleep Mode (0.3 µA)
• Integrated PCB trace antenna
• 16 RF channels
• Up to 12,000 feet of range
• AES 128-bit encryption
• FCC, CE and IC certifications
• ROHS compliant
APPLICATIONS
Industrial Controls
• Food processing controls
• Traffic Management
• Sensor Networks
• Asset Management
• Barcode reader
• Patient Monitoring
• Glucose monitor
Home &
Building Automation
• Security
• HVAC control
• Lighting control
• Thermostats
Part Number
MeshConnect™
Module
MeshConnect™
Extended Range Module
Order Number
ZICM2410P0-1
ZICM2410P0-1-SN
ZICM2410P0-1C
ZICM2410P0-1C-SN
ZICM2410P0-KIT2-1
ZICM2410P2-1
ZICM2410P2-1-SN
ZICM2410P2-1C
ZICM2410P2-1C-SN
ZICM2410P2-KIT1-1
Description
+6 dBm Output power, PCB Trace antenna
+6 dBm Output power, PCB Trace antenna, SNAP software
+6 dBm Output power, with u.FL Connector for external antenna
+6 dBm Output power, with u.FL Connector for external antenna, SNAP software
+6 dBm Engineering Development Kit
+20 dBm Output power, PCB Trace antenna
+20 dBm Output power, PCB Trace antenna, SNAP software
+20 dBm Output power, with u.FL Connector for external antenna
+20 dBm Output power, with u.FL Connector for external antenna, SNAP software
Evaluation board for +20 dBm module
The information in this document is subject to change without notice, please confirm data is current
Document No: 0007-00-07-00-000 (Issue C)
Date Published: April 7, 2010
Page 1
1 page  
MeshConnect™ Module Series
ANTENNA
CEL's MeshConnect modules include an integrated Printed Circuit Board (PCB) trace antenna. An optional u.FL connector
can be specified, providing connection to a 50-ohm external antenna of the user’s choice. See Ordering Information on
page 1.
The PCB antenna employs an F-Antenna topology that is compact and supports an omni-directional radiation pattern.
To maximize antenna efficiency, an adequate ground plane must be provided on the host PCB. Correctly positioned, the
ground plane on the host PCB will contribute significantly to the antenna performance (it should not be directly under
the F-Antenna). The position of the module on the host board and overall design of the product enclosure contribute to
antenna performance. Poor design affects radiation patterns and can result in reflection, diffraction, and/or scattering of the
transmitted signal.
Here are some design guidelines to help ensure antenna performance:
• Never place the ground plane or route copper traces directly underneath the antenna portion of the module.
• Never place the antenna close to metallic objects.
• In the overall design, ensure that wiring and other components are not placed near the antenna.
• Do not place the antenna in a metallic or metalized plastic enclosure.
• Keep plastic enclosures 1cm or more from the antenna in any direction.
For optimum antenna performance, the MeshConnect modules should be mounted with the PCB trace antenna
overhanging the edge of the host board. To further improve performance, a ground plane may be placed on the host board
under the module, up to the antenna. The installation of an uninterrupted ground plane on a layer directly beneath the
module will also allow you to run traces under this layer. CEL can provide assistance with your PCB layout.
MODES OF OPERATION
There are three power down modes in the IC. Each mode can be set using the PDMODE [1:0] bits in the PDCON register
and power down modes can be started by setting the PDSTART bit to 1. Each mode has a different current consumption
and wake-up sources, please refer to the IC datasheet for further information on the available power down modes. Table 8
describes the three power down modes.
PDMODE [1:0]
Table 8 – Power Down Modes
Description
Wake-Up Source
Regulator for Digital
block
0 Active (Normal Operation)
-
-
Hardware Reset,
1
PM1 mode
Sleep Timer interrupt,
ON
External interrupt
Hardware Reset,
OFF
2
PM2 mode
Sleep Timer interrupt,
(After wake-up, register
External interrupt
configuration is required)
3
PM3 mode
Hardware Reset,
External interrupt
OFF
(After wake-up, register
configuration is required)
Page 5
5 Page 
MeshConnect™ Module Series
MODULE DIMENSIONS
MeshConnect™ Module / MeshConnect™ Extended Range Module
w/U.FL Connector for external antenna
0.120”
Pin 1
Pin 19
J2
ZICM2410P0
0R
C25
0007 00 00 00 001
C7 C7B
R1
R7
U1
C9 R2
C10
C11
L3
C13
L4
C14
L2
C21
R10
C24
C5B
R11 C23
C22
R8
C6A C1
L6
C6 C6B
C2
C4A R5 R4
C17
C16
R6 R9 XTAL1
C15
Pin 56
Pin 38
RF Shield
1.000”
0.195”
0.062”
MeshConnect™ Module / MeshConnect™ Extended Range Module
w/PCB Trace Antenna
Pin 1
Pin 19
J2
ZICM2410P0
0R
C25
0007 00 00 00 001
C7 C7B
R1
R7
U1
C9 R2
C10
C11
L3
C13
L4
C14
L2
C21
R10
C24
C5B
R11 C23
C22
R8
C6A C1
L6
C6 C6B
C2
C4A R5 R4
C17
C16
R6 R9 XTAL1
C15
1.000”
Pin 56
Pin 38
RF Shield
0.195”
0.062”
For layout recommendation for optimum antenna performance, refer to Antenna section in this document.
Page 11
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet ZICM2410P0-1C-SN.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ZICM2410P0-1C-SN | Module and Extended Range Module | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |