DataSheetWiki


R5438L fiches techniques PDF

RICOH electronics devices division - Li-ION/POLYMER 1/2/3-CELL PROTECTOR Second protection IC

Numéro de référence R5438L
Description Li-ION/POLYMER 1/2/3-CELL PROTECTOR Second protection IC
Fabricant RICOH electronics devices division 
Logo RICOH electronics devices division 





1 Page

No Preview Available !





R5438L fiche technique
R5437/R5438L
Li-ION/POLYMER 1/2/3-CELL PROTECTOR Second protection IC
NO.EA-324-140808
OUTLINES
R5437/R5438 Series are CMOS-based high voltage tolerant over-charge protection ICs for Li-ion/Li-polymer
secondary battery. The R5437/R5438 can detect overcharge of 1-cell to 3-cell Li-ion/ Li-polymer batteries. The
R5437/R5438 is consists of 3 voltage detectors, a voltage reference unit, an internal voltage regulator, an
oscillator, a counter, a delay circuit, a logic circuit.
When the over-charge is detected, after the IC internally fixed delay time, the output of COUT becomes "H".
After detecting over-charge, when the cell voltage becomes lower than the over-charge released voltage, the
over-charge state is released.
If all the cells voltages become equal or less than the shutdown detector threshold, all the circuits are halted
and shut down, as a result, the consumption current of IC itself (Shutdown current) is extremely reduced.
The output type is CMOS.
FEATURES
Manufactured with High Voltage Tolerant Process ...... Absolute Maximum Rating
26V
Low supply current ........................................... Cell voltage 3.9V, for 3-cell
Typ. 0.85µA
High accuracy detector threshold .................... Over-charge detector (Ta=25°C)
±20mV
(Ta=0 to 60°C)
±25mV
Variety of detector threshold
Over-charge detector threshold
4.1V-4.6V step of 0.005V (VDET1n) (n=1, 2, 3)
Over-charge released voltage
VDET1n-0V to VDET1n-0.5V step of 0.05V (VREL1n) (n=1, 2, 3)
Setting of Output delay time............................. Over-charge detector Output Delay options 2, 4, 6s(Built-in delay)
Shutdown Function ............................................When all the cell voltages become equal or less than shutdown
detector threshold, the IC will be into shutdown mode and the consumption current of IC itself becomes extremely small.
Even if one of the cells becomes equal or more than shutdown released voltage, the shutdown mode is released.
Shutdown detector threshold ............................Typ. 3.5V±0.3V
Shutdown Release Hysteresis ..........................none
Shutdown current ..............................................Max. 0.1μA
1/2/3 cell protection enabler..............................By external wiring, 1 or 2 or 3-cell protection can be selected.
Over-charge released condition........................Released by voltage type
COUT output ........................................................COUT: 4.7V regulator power supply CMOS output. Active "H"
Delay Time Shortening Function.......................By applying the voltage of 4V±0.2V to VDD-VC1, over-charge
and released delay time can be shortened to 1/90.
Small package.................................................. DFN1814-6
1

PagesPages 21
Télécharger [ R5438L ]


Fiche technique recommandé

No Description détaillée Fabricant
R5438L Li-ION/POLYMER 1/2/3-CELL PROTECTOR Second protection IC RICOH electronics devices division
RICOH electronics devices division

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche