RS-15-15 Datasheet PDF - Mean Well
| Part Number | RS-15-15 | |
| Description | 15W Single Output Switching Power Supply | |
| Manufacturers | Mean Well | |
| Logo |  |
|
|
There is a preview and RS-15-15 download ( pdf file ) link at the bottom of this page. Total 7 Pages | ||
Preview 1 page No Preview Available !
15W Single Output Switching Power Supply
Jameco SKU Number: 2106685
RS-15 series
■ Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105℃ long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
SPECIFICATION
3 years warranty
..
MODEL
RS-15-3.3
RS-15-5
RS-15-12
RS-15-15
RS-15-24
RS-15-48
DC VOLTAGE
3.3V 5V
12V 15V 24V 48V
RATED CURRENT
3A
3A
1.3A 1A
0.625A
0.313A
CURRENT RANGE
0 ~ 3A
0 ~ 3A
0 ~ 1.3A
0 ~ 1A
0 ~ 0.625A
0 ~ 0.313A
RATED POWER
9.9W
15W
15.6W
15W
15W
15W
OUTPUT
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
120mVp-p
120mVp-p
VOLTAGE ADJ. RANGE
2.9 ~ 3.6V
4.75 ~ 5.5V
10.8 ~ 13.2V
13.5 ~ 16.5V
VOLTAGE TOLERANCE Note.3 ± 3.0%
± 2.0%
± 1.0%
± 1.0%
LINE REGULATION Note.4 ± 0.5%
± 0.5%
± 0.5%
± 0.5%
LOAD REGULATION Note.5 ± 2.0%
± 1.5%
± 0.5%
± 0.5%
SETUP, RISE TIME
1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
200mVp-p
22 ~ 27.6V
± 1.0%
± 0.5%
± 0.5%
200mVp-p
43.2 ~ 52.8V
± 1.0%
± 0.5%
± 0.5%
HOLD UP TIME (Typ.)
70ms/230VAC 15ms/115VAC at full load
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
INPUT
EFFICIENCY (Typ.)
72%
77%
81%
81%
82%
82%
AC CURRENT (Typ.)
0.35A/115VAC 0.25A/230VAC
INRUSH CURRENT (Typ.) COLD START 65A / 230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVERLOAD
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
Protection type : Shut off o/p voltage, clamping by zener diode
28.4 ~ 32.4V
55.2 ~ 64.8V
OVER TEMPERATURE
U1 Tj 140℃ typically (U1) detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-20 ~ +70℃ (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
± 0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
SAFETY &
EMC
(Note 6)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25℃ 70%RH
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A
MTBF
1608.8Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION
62.5*51*28mm (L*W*H)
PACKING
0.13Kg; 108pcs/15Kg/0.71CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:RS-15-SPEC 2007-10-25
|
| |
 
15W Single Output Switching Power Supply
RS-15 series
ENVIRONMENT TEST
NO TEST ITEM
1 TEMPERATURE RISE TEST
SPECIFICATION
TEST CONDITION
MODEL：RS-15-5
1. ROOM AMBIENT BURN-IN：2 HRS
I/P: 230VAC O/P: FULL LOAD Ta= 28.8℃
2. HIGH AMBIENT BURN-IN： 3 HRS
I/P: 230VAC O/P: FULL LOAD Ta= 48.2℃
RESULT
VERDICT
2 OVER LOAD BURN-IN TEST
3 LOW TEMPERATURE
TURN ON TEST
4 HIGH HUMIDITY
HIGH TEMPERATURE
HIGH VOLTAGE
TURN ON TEST
5 TEMPERATURE
COEFFICIENT
6 VIBRATION TEST
NO Position
1 U1
2 D1
3 ZD1
4 C5
5 BD1
6 LF1
7 T1 COIL
8 C105
9 D100
10 L100
11 PCB
P/N
TNY279PN
FR107 1A/1KV
P6KE250A
33U/400V 105℃ KMG
KBP208G 2A/800V
LF-510
TF-1641
1000U/16V 105℃ ZLH
STPS30L60CT 30A/60V
DR011C
TI 與 C105 間
ROOM AMBIENT HIGH AMBIENT
Ta= 28.8 ℃ Ta= 48.2 ℃
84.9℃
106.8℃
76.6℃
94.5℃
73.6℃
91.4℃
59.8℃
77.6℃
63.9℃
81.4℃
61.7℃
80.2℃
83.4℃
101.6℃
67.2℃
84.7℃
70.3℃
88.6℃
58.6℃
77.0℃
72.2℃
90.4℃
NO DAMAGE
1 HOUR ( MIN )
TURN ON AFTER 2 HOUR
I/P: 230 VAC
O/P: 120 ﹪LOAD
Ta:25℃
I/P: 230 VAC
O/P: 100﹪LOAD
Ta= -20℃
AFTER 12 HOURS
IN CHAMBER ON
CONTROL 50℃
NO DAMAGE
+ 0.03 %(0~50℃)
1 Carton & 1 Set
(1) Waveform: Sine Wave
(2) Frequency:10~500Hz
(3) Sweep Time:10min/sweep cycle
(4) Acceleration:5G
(5) Test Time:1 hour in each axis (X.Y.Z)
(6) Ta:25℃
I/P: 272 VAC
O/P:FULL LOAD
Ta= 50℃
HUMIDITY= 95 %R.H
I/P: 230 VAC
O/P:FULL LOAD
TEST：OK
TEST：OK
TEST：OK
+ 0.01 %(0~50℃)
TEST：OK
P
P
P
P
P
P
Model: RS-15-3.3
Test Report 3 / 5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RS-15-15 electronic component. |
| Information | Total 7 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ RS-15-15.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| RS-15-15 | The function is 15W Single Output Switching Power Supply. Mean Well | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
RS-1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||