|
|
PDF LP0603N5500ANTR Data sheet ( Hoja de datos )
| Número de pieza | LP0603N5500ANTR | |
| Descripción | Thin-Film Low Pass Filter | |
| Fabricantes | AVX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LP0603N5500ANTR (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Thin-Film Low Pass Filter
LP0603 Lead-Free LGA Type
GENERAL DESCRIPTION
The LP0603 ITF (Integrated Thin Film) Lead-Free LGA Low
Pass Filter is based on thin-film multilayer technology. The
technology provides a miniature part with excellent high
frequency performance and rugged construction for reliable
automatic assembly.
The ITF Low Pass Filters are offered in a variety of frequency
bands compatible with various types of high frequency
wireless systems.
FEATURES
• Miniature Size: 0603
• Frequency Range: 900MHz-5.5HGz
• Characteristic Impedance: 50 Ohm
• Operating/Storage Temperature: -40°C to +85°C
• Power Rating: 3W Continuous
• Low Profile
• Rugged Construction
• Lead Free
• Taped and Reeled
APPLICATIONS
• Mobile communications
• Satellite TV receivers
• GPS
• Vehicle location systems
• Wireless LANs
• RFID
LAND GRID ARRAY ADVANTAGES
• Inherent Low Profile
• Self Alignment during Reflow
• Excellent Solderability
• Low Parasitics
• Better Heat Dissipation
HOW TO ORDER
LP 0603
Style
Size
0603
A
Type
A or N
XXXX
Frequency
MHz
FINAL QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR, 4 hours
A
Sub-Type
N TR
Termination Taped & Reeled
LGA
**Ni/Lead Free Solder
**RoHS compliant
4
LEAD-FREE COMPATIBLE
COMPONENT
TERMINATION
Nickel/Lead-Free Solder coating compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.
105
1 page  
Thin-Film Low Pass Filter
LP0603 Lead-Free LGA Type Test Jig
TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER
GENERAL DESCRIPTION
These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50Ω microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.127mm from the microstrips.
The substrate used is Neltec’s NH9338ST0127C1BC (or
similar).
The connectors are SMA type (female), ‘Johnson
Components Inc.’ Product P/N: 142-0701-841 (or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50Ω SMA termination.
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
Input
(Filter)
² Connector 1 (Jig)
GND (Filter) ² GND (Jig)
Output
(Filter)
²
Connector
2
(Jig)
GND (Filter) ² GND (Jig)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
Measurement
Connector 1
Connector 2
Calibration Jig
Short line to
GND
Open
line
Load &
Through
Load &
OUT
Connector
Johnson
P/N 152-0701-841
4
109
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LP0603N5500ANTR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LP0603N5500ANTR | Thin-Film Low Pass Filter | AVX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |