|
|
PDF S5U13781R00C10M Data sheet ( Hoja de datos )
| Número de pieza | S5U13781R00C10M | |
| Descripción | User Manual | |
| Fabricantes | EPSON | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S5U13781R00C10M (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
S5U13781R00C10M
User Manual
Document Number: X94A-G-008-01
Status: Revision 0.93
Issue Date: 2012/09/14
SEIKO EPSON CORPORATION
Rev. 1.0
1 page  
Figure 2 shows a picture of the S5U13781M00C100 Signal Adapter Board Set.
Page 5
Figure 2 – S5U13781M00C100 Signal Adapter Board Set
The S5U13781M00C100 Signal Adapter Board Set is a supplement to the S5U13781R00C100 Reference
Board Set and it consists of three break-off sub-boards (schematics and layout are in Sections 8 and 9):
• “Board A – Host Interface Adapter” is used to adapt the S5U13781R00C100 Main Board’s Host
Interface signals (P5) to the Stellaris LM4F120 Launchpad BoosterPack connectors (P1 to P4),
and it also routes the S5U13781R00C100 Main Boards’ LCD Interface signals (P9) to a
connector (J2) for connecting to either “Board B – LCD Signal Adapter – 40Pin” or “Board C –
LCD Signal Adapter – 54Pin”.
• “Board B – LCD Signal Adapter – 40Pin” provides signal routing for connecting to an LCD
module with a 40-pin FPC (4.3” WQVGA). One side (PB1) connects to J2 of Board A and the
other side (PB2) connects to J9 of the S5U13781R00C100 LCD interface board.
• “Board C – LCD Signal Adapter – 54Pin” provides signal routing for connecting to an LCD
module with a 54-pin FPC (3.5” QVGA). One side (PC1) connects to J2 of Board A and the
other side (PC2+PC3) connects to J9+J10 of the S5U13781R00C100 LCD interface board.
This user manual is updated as appropriate. Please check the Seiko Epson Website at
http://www.epson.jp/device/semicon_e/product/lcd_controllers/index.htm for the latest revision of this
document before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
X94A-G-008-01
Issue Date: 2012/09/14
Seiko Epson Corporation
S5U13781R00C10M User Manual
Revision 0.93
5 Page 
Page 11
4 StellarisWare Drivers and Demo Software
The S1D13781 BoosterPack LCDC Development Package was developed with a companion software
package that is available from the Epson website at vdc.epson.com. This software package includes a
S1D13781 demonstration application and graphics library driver software source code intended for use in
combination with TI StellarisWare and the Stellaris LM4F120 Launchpad.
4.1 Requirements
4.1.1 Hardware Requirements
The S1D13781 BoosterPack LCDC Development Package software was developed for use with the
following hardware.
• Stellaris LM4F120 Launchpad
• S5U13781R00C10M
• Compatible LCD Display
For details on preparing the hardware for use, see Section Error! Reference source not found., Error!
Reference source not found..
4.1.2 Software Requirements
The S1D13781 BoosterPack LCDC Development Package software was developed for use with the
following software tools.
• Code Composer Studio – see http://www.ti.com/tool/ccstudio
• StellarisWare – see http://www.ti.com/stellaris
• ICDI USB drivers (for debugging) – see http://www.ti.com/tool/stellaris_icdi_drivers
4.2 Software Installation
The following steps are required to install the S1D13781 BoosterPack LCDC Development Package
software and the required software tools. If the TI software tools have already been installed, skip to step
4.
Note:
The following instructions assume a PC running Windows XP (or higher). For compatibility with other
operating systems or development platforms, please refer to TI’s website at http://www.ti.com/stellaris.
1. Install the Code Composer Studio IDE.
2. Install StellarisWare
3. Connect the Launchpad to the PC via a USB connector. When prompted, install the Stellaris ICDI
drivers. On some systems, the drivers must be manually installed using the Windows Device
Manager.
4. Extract the S1D13781 BoosterPack software into the StellarisWare working folder for the
Launchpad board model being used (i.e. C:/StellarisWare/boards/ek-lm4f120xl/).
5. Open Code Composer Studio.
X94A-G-008-01
Issue Date: 2012/09/14
Seiko Epson Corporation
S5U13781R00C10M User Manual
Revision 0.93
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet S5U13781R00C10M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S5U13781R00C10M | User Manual | EPSON |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |