DataSheetWiki


SAM9M11 fiches techniques PDF

ATMEL Corporation - AT91SAM ARM-based Embedded MPU

Numéro de référence SAM9M11
Description AT91SAM ARM-based Embedded MPU
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





SAM9M11 fiche technique
Features
400 MHz ARM926EJ-S™ ARM® Thumb® Processor
– 32 KBytes Data Cache, 32 KBytes Instruction Cache, MMU
Memories
– 4-port, 4-bank DDR2/LPDDR Controller
– External Bus Interface supporting 4-bank DDR2/LPDDR, SDR/LPSDR, Static
Memories, CompactFlash®, SLC NAND Flash with ECC
– One 64-KByte internal SRAM, single-cycle access at system speed or processor
speed through TCM interface
– One 64-KByte internal ROM, embedding bootstrap routine
Peripherals
– Universal Video Decoder provides decoding at up to 30 fps at D1 (720 x 576 pixels)
or WVGA (800 x 480) resolution
– LCD Controller supporting STN and TFT displays up to 1280*860
– ITU-R BT. 601/656 Image Sensor Interface
– Dual High Speed USB Host and a High Speed USB Device with On-Chip
Transceivers
– 10/100 Mbps Ethernet MAC Controller
– Two High Speed Memory Card Hosts (SDIO, SDCard, e.MMC and CE ATA)
– AC'97 controller
– Two Master/Slave Serial Peripheral Interfaces
– Two Three-channel 16-bit Timer/Counters
– Two Synchronous Serial Controllers (I2S mode)
– Four-channel 16-bit PWM Controller
– Two Two-wire Interfaces
– Four USARTs with ISO7816, IrDA, Manchester and SPI modes; one DBGU
– 8-channel 10-bit ADC with 4-wire Touch Screen support
Cryptography
– TRNG True Random Number Generator
– AES256-, 192-, 128-bit Key Algorithm
– TDES Compliant with FIPS PUB 46-3 Specifications
– SHA (SHA1 and SHA256) Compliant with FIPS Publication 180-2
System
– 133 MHz twelve 32-bit layer AHB Bus Matrix
– 39 DMA Channels
– Boot from NAND Flash, SDCard, DataFlash® or serial DataFlash
– Reset Controller with on-chip Power-on Reset
– Selectable 32768 Hz Low-power and 12 MHz Crystal Oscillators
– Internal Low-power 32 kHz RC Oscillator
– One PLL for the system and one 480 MHz PLL optimized for USB High Speed
– Two Programmable External Clock Signals
– Advanced Interrupt Controller and Debug Unit
– Periodic Interval Timer, Watchdog Timer, Real Time Timer and Real Time Clock
I/O
– Five 32-bit Parallel Input/Output Controllers
– 160 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os with
Schmitt trigger input
Package
– 324-ball TFBGA, pitch 0.8 mm
AT91SAM
ARM-based
Embedded MPU
SAM9M11
Summary
NOTE: This is a summary document.
The complete document is available
under NDA. For more information,
please contact your local Atmel sales
office.
6437DS–ATARM–23-Apr-13

PagesPages 30
Télécharger [ SAM9M11 ]


Fiche technique recommandé

No Description détaillée Fabricant
SAM9M11 AT91SAM ARM-based Embedded MPU ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche