DataSheetWiki


AP1695 fiches techniques PDF

Diodes - HIGH EFFICIENCY DIMMABLE LED DRIVER IC

Numéro de référence AP1695
Description HIGH EFFICIENCY DIMMABLE LED DRIVER IC
Fabricant Diodes 
Logo Diodes 





1 Page

No Preview Available !





AP1695 fiche technique
A Product Line of
Diodes Incorporated
AP1695
Description
OFFLINE, HIGH PF, HIGH EFFICIENCY DIMMABLE LED DRIVER IC
Features
The AP1695 is a high performance AC/DC power factor corrector for
mains dimmable LED driver applications. The device uses Pulse
Frequency Modulation (PFM) technology to regulate output current
while achieving high power factor and low THD. It operates as a BCM
(Boundary Conduction Mode) which is good for EMI.
The AP1695 internally integrates a 500V high voltage MOSFET which
can realize a lower BOM cost. The AP1695 provides accurate
constant current (CC) regulation while removing the opto-coupler and
secondary control circuitry. It also eliminates the need of loop
compensation circuitry while maintaining stability. It can meet the
requirement of IEC6100-3-2 harmonic standard.
The AP1695 features low start-up current, low operation current. It
adopts valley on switching mode to achieve high efficiency. It also has
rich protection features including over voltage, short circuit, over
temperature protection.
The AP1695 provides the dimmable LED driver with a wide dimmer
compatibility including leading edge and trailing edge dimmer. The
AP1695 can achieve deep dimming down to 1%, while the dimming
curve is compliant with the standard of NEMA SSL6.
Boundary Conduction Mode (BCM) Operation to Achieve High-
efficiency
High PF and Low THD (PF>0.9, THD<30%)
High Efficiency without Dimmer
Wide Range of Dimmer Compatibility
Dimming Curve Compliant with NEMA SSL6
Low Start-up Current
Tight LED Current
Tight LED Open Voltage
Valley-mode Switching to Minimize the Transition Loss
Internal Integrated 2A/500V MOSFET can Cover up to 10W
Easy EMI
Internal Protections:
Under Voltage Lock Out (UVLO)
Leading-edge Blanking (LEB)
Output Short Protection
Output Open Protection
Over Temperature Protection
Flexible for Design with Small Form Factor and Very Low BOM
Cost
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The AP1695 is available in SO-7 package.
Pin Assignments
Applications
Mains Dimmable LED Lighting
(Top View)
S1
CS 2
RI 3
GND 4
SO-7
7 Drain
6 VCC
5 FB
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AP1695
Document number: DS37312 Rev. 1 - 2
1 of 15
www.diodes.com
June 2014
© Diodes Incorporated

PagesPages 15
Télécharger [ AP1695 ]


Fiche technique recommandé

No Description détaillée Fabricant
AP1690 SINGLE STAGE PRIMARY SIDE REGULATION PFC CONTROLLER Diodes
Diodes
AP1694 HIGH EFFICIENCY DIMMABLE LED DRIVER CONTROLLER Diodes
Diodes
AP1694A HIGH EFFICIENCY DIMMABLE LED DRIVER CONTROLLER Diodes
Diodes
AP1694AS-13 HIGH EFFICIENCY DIMMABLE LED DRIVER CONTROLLER Diodes
Diodes

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche