DataSheetWiki


MT29F1G08ABBDAH4 fiches techniques PDF

Micron Technology - NAND Flash Memory

Numéro de référence MT29F1G08ABBDAH4
Description NAND Flash Memory
Fabricant Micron Technology 
Logo Micron Technology 





1 Page

No Preview Available !





MT29F1G08ABBDAH4 fiche technique
Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
NAND Flash Memory
MT29F1G08ABADAWP, MT29F1G08ABBDAH4,
MT29F1G08ABBDAHC, MT29F1G16ABBDAH4,
MT29F1G16ABBDAHC, MT29F1G08ABADAH4
Features
Open NAND Flash Interface (ONFI) 1.0-compliant1
Single-level cell (SLC) technology
Organization
Page size x8: 2112 bytes (2048 + 64 bytes)
Page size x16: 1056 words (1024 + 32 words)
Block size: 64 pages (128K + 4K bytes)
Device size: 1Gb: 1024 blocks
Asynchronous I/O performance
tRC/tWC: 20ns (3.3V), 25ns (1.8V)
Array performance
Read page: 25µs3
Program page: 200µs (TYP, 3.3V and 1.8V)3
Erase block: 700µs (TYP)
Command set: ONFI NAND Flash Protocol
Advanced command set
Program page cache mode5
Read page cache mode5
One-time programmable (OTP) mode
Read unique ID
Internal data move
Operation status byte provides software method for
detecting
Operation completion
Pass/fail condition
Write-protect status
Internal data move operations supported within the
device from which data is read
Ready/busy# (R/B#) signal provides a hardware
method for detecting operation completion
WP# signal: write protect entire device
First block (block address 00h) is valid when ship-
ped from factory with ECC. For minimum required
ECC, see Error Management.
Block 0 requires 1-bit ECC if PROGRAM/ERASE cy-
cles are less than 1000
RESET (FFh) required as first command after power-
on
Alternate method of device initialization (Nand_In-
it) after power up4 (contact factory)
Quality and reliability
Data retention: 10 years
Operating Voltage Range
VCC: 2.7–3.6V
VCC: 1.7–1.95V
Operating temperature:
Commercial: 0°C to +70°C
Extended (ET): –40ºC to +85ºC
Package
48-pin TSOP type 1, CPL2
63-ball VFBGA
Notes:
1. The ONFI 1.0 specification is available at
www.onfi.org.
2. CPL = Center parting line.
3. See Electrical Specifications for tR_ECC and
tPROG_ECC specifications.
4. Available only in the 1.8V VFBGA package.
5. Supported only with ECC disabled.
PDF: 09005aef83e5ffed
m68a.pdf – Rev. D 06/10 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.

PagesPages 70
Télécharger [ MT29F1G08ABBDAH4 ]


Fiche technique recommandé

No Description détaillée Fabricant
MT29F1G08ABBDAH4 NAND Flash Memory Micron Technology
Micron Technology
MT29F1G08ABBDAHC NAND Flash Memory Micron Technology
Micron Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche