DataSheetWiki


MT29F256G08CMAAA fiches techniques PDF

Micron - NAND Flash Memory

Numéro de référence MT29F256G08CMAAA
Description NAND Flash Memory
Fabricant Micron 
Logo Micron 





1 Page

No Preview Available !





MT29F256G08CMAAA fiche technique
Micron Confidential and Proprietary
64Gb, 128Gb, 256Gb, 512Gb Asynchronous/Synchronous NAND
Features
NAND Flash Memory
MT29F64G08CBAA[A/B], MT29F128G08C[E/F]AAA, MT29F128G08CFAAB,
MT29F256G08C[J/K/M]AAA, MT29F256G08CJAAB, MT29F512G08CUAAA,
MT29F64G08CBCAB, MT29F128G08CECAB, MT29F256G08C[K/M]CAB,
MT29F512G08CUCAB
Features
Open NAND Flash Interface (ONFI) 2.2-compliant1
Multiple-level cell (MLC) technology
Organization
Page size x8: 8640 bytes (8192 + 448 bytes)
Block size: 256 pages (2048K + 112K bytes)
Plane size: 2 planes x 2048 blocks per plane
Device size: 64Gb: 4096 blocks;
128Gb: 8192 blocks;
256Gb: 16,384 blocks;
512Gb: 32,786 blocks
Synchronous I/O performance
Up to synchronous timing mode 52
Clock rate: 10ns (DDR)
Read/write throughput per pin: 200 MT/s
Asynchronous I/O performance
Up to asynchronous timing mode 5
tRC/tWC: 20ns (MIN)
Up to asynchronous timing mode 5
Read/write throughput per pin: 50 MT/s
Array performance
Read page: 75µs (MAX)
Program page: 1300µs (TYP)
Erase block: 3.8ms (TYP)
Operating Voltage Range
VCC: 2.7–3.6V
VCCQ: 1.7–1.95V, 2.7–3.6V
Command set: ONFI NAND Flash Protocol
Advanced Command Set
Program cache
Read cache sequential
Read cache random
One-time programmable (OTP) mode
Multi-plane commands
Multi-LUN operations
Read unique ID
Copyback
First block (block address 00h) is valid when ship-
ped from factory. For minimum required ECC, see
Error Management (page 109).
RESET (FFh) required as first command after power-
on
Operation status byte provides software method for
detecting
Operation completion
Pass/fail condition
Write-protect status
Data strobe (DQS) signals provide a hardware meth-
od for synchronizing data DQ in the synchronous
interface
Copyback operations supported within the plane
from which data is read
Quality and reliability
Data retention: JESD47G compliant; see qualifica-
tion report
Endurance: 3000 PROGRAM/ERASE cycles
Operating temperature:
Commercial: 0°C to +70°C
Industrial (IT): –40ºC to +85ºC
Package
52-pad LGA
48-pin TSOP
100-ball BGA
Notes:
1. The ONFI 2.2 specification is available at
www.onfi.org.
2. BGA devices up to Synchronous timing
mode 5. TSOP devices up to Synchronous tim-
ing mode 4.
PDF: 09005aef83d2277a
Rev. E 3/11 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.

PagesPages 70
Télécharger [ MT29F256G08CMAAA ]


Fiche technique recommandé

No Description détaillée Fabricant
MT29F256G08CMAAA NAND Flash Memory Micron
Micron
MT29F256G08CMAAA NAND Flash Memory Micron
Micron

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche