|
|
Numéro de référence | MT29F512G08CUCAB | ||
Description | NAND Flash Memory | ||
Fabricant | Micron | ||
Logo | |||
1 Page
Micron Confidential and Proprietary
64Gb, 128Gb, 256Gb, 512Gb Asynchronous/Synchronous NAND
Features
NAND Flash Memory
MT29F64G08CBAA[A/B], MT29F128G08C[E/F]AAA, MT29F128G08CFAAB,
MT29F256G08C[J/K/M]AAA, MT29F256G08CJAAB, MT29F512G08CUAAA,
MT29F64G08CBCAB, MT29F128G08CECAB, MT29F256G08C[K/M]CAB,
MT29F512G08CUCAB
Features
• Open NAND Flash Interface (ONFI) 2.2-compliant1
• Multiple-level cell (MLC) technology
• Organization
– Page size x8: 8640 bytes (8192 + 448 bytes)
– Block size: 256 pages (2048K + 112K bytes)
– Plane size: 2 planes x 2048 blocks per plane
– Device size: 64Gb: 4096 blocks;
128Gb: 8192 blocks;
256Gb: 16,384 blocks;
512Gb: 32,786 blocks
• Synchronous I/O performance
– Up to synchronous timing mode 52
– Clock rate: 10ns (DDR)
– Read/write throughput per pin: 200 MT/s
• Asynchronous I/O performance
– Up to asynchronous timing mode 5
– tRC/tWC: 20ns (MIN)
– Up to asynchronous timing mode 5
– Read/write throughput per pin: 50 MT/s
• Array performance
– Read page: 75µs (MAX)
– Program page: 1300µs (TYP)
– Erase block: 3.8ms (TYP)
• Operating Voltage Range
– VCC: 2.7–3.6V
– VCCQ: 1.7–1.95V, 2.7–3.6V
• Command set: ONFI NAND Flash Protocol
• Advanced Command Set
– Program cache
– Read cache sequential
– Read cache random
– One-time programmable (OTP) mode
– Multi-plane commands
– Multi-LUN operations
– Read unique ID
– Copyback
• First block (block address 00h) is valid when ship-
ped from factory. For minimum required ECC, see
Error Management (page 109).
• RESET (FFh) required as first command after power-
on
• Operation status byte provides software method for
detecting
– Operation completion
– Pass/fail condition
– Write-protect status
• Data strobe (DQS) signals provide a hardware meth-
od for synchronizing data DQ in the synchronous
interface
• Copyback operations supported within the plane
from which data is read
• Quality and reliability
– Data retention: JESD47G compliant; see qualifica-
tion report
– Endurance: 3000 PROGRAM/ERASE cycles
• Operating temperature:
– Commercial: 0°C to +70°C
– Industrial (IT): –40ºC to +85ºC
• Package
– 52-pad LGA
– 48-pin TSOP
– 100-ball BGA
Notes:
1. The ONFI 2.2 specification is available at
www.onfi.org.
2. BGA devices up to Synchronous timing
mode 5. TSOP devices up to Synchronous tim-
ing mode 4.
PDF: 09005aef83d2277a
Rev. E 3/11 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
|
|||
Pages | Pages 30 | ||
Télécharger | [ MT29F512G08CUCAB ] |
No | Description détaillée | Fabricant |
MT29F512G08CUCAB | NAND Flash Memory | Micron |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |