DataSheetWiki


MT29F16G16ADACA fiches techniques PDF

Micron - NAND Flash Memory

Numéro de référence MT29F16G16ADACA
Description NAND Flash Memory
Fabricant Micron 
Logo Micron 





1 Page

No Preview Available !





MT29F16G16ADACA fiche technique
Micron Confidential and Proprietary
8Gb,16Gb: x8, x16 NAND Flash Memory
Features
NAND Flash Memory
MT29F8G08ABACA, MT29F8G16ABACA, MT29F8G08ABBCA,
MT29F8G16ABBCA, MT29F16G08ADACA, MT29F16G16ADACA,
MT29F16G08ADBCA , MT29F16G16ADBCA
Features
• Open NAND Flash Interface (ONFI) 1.0-compliant1
• Single-level cell (SLC) technology
• Organization
– Page size x8: 4320 bytes (4096 + 224 bytes)
– Page size x16: 2160 words (2048 + 112 words)
– Block size: 64 pages (256K + 14K bytes)
– Plane size: 2 planes x 2048 blocks per plane
– Device size: 8Gb: 4096 blocks
– Device size: 16Gb: 8192 blocks
• Asynchronous I/O performance
tRC/tWC: 20ns (3.3V), 30ns (1.8V)
• Array performance
– Read page: 25µs
– Program page: 200µs (TYP)
– Erase block: 2ms (TYP)
• Command set: ONFI NAND Flash Protocol
• Advanced command set
– Program page cache mode
– Read page cache mode
– One-time programmable (OTP) mode
– Block lock (1.8V only)
– Programmable drive strength
– Two-plane commands
– Multi-die (LUN) operations
– Read unique ID
– Internal data move
• Operation status byte provides software method for
detecting
– Operation completion
– Pass/fail condition
– Write-protect status
• Ready/Busy# (R/B#) signal provides a hardware
method of detecting operation completion
• WP# signal: Write protect entire device
• First block (block address 00h) is valid when ship-
ped from factory with ECC. For minimum required
ECC, see Error Management.
• RESET (FFh) required as first command after
power-on
• Alternative method of device initialization after
power-up (contact factory)
• Internal data move operations supported within the
plane from which data is read
• Quality and reliability
– Data retention: JESD47G-compliant; see qualifi-
cation report
– Endurance: See qualification report
• Operating voltage range
– VCC: 2.7–3.6V
– VCC: 1.7–1.95V
• Operating temperature
– Commercial: 0°C to +70°C
– Industrial (IT): –40ºC to +85ºC
• Package
– 48-pin TSOP type 1, CPL2
– 63-ball VFBGA
Notes: 1. The ONFI 1.0 specification is available at
www.onfi.org.
2. CPL = Center parting line
PDF: 09005aef83ea4f61
m71m_8Gb_nand.pdf – Rev. L 1/12 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.

PagesPages 70
Télécharger [ MT29F16G16ADACA ]


Fiche technique recommandé

No Description détaillée Fabricant
MT29F16G16ADACA NAND Flash Memory Micron
Micron

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche