DataSheetWiki


ISL78420 fiches techniques PDF

Intersil Corporation - Half-Bridge Driver

Numéro de référence ISL78420
Description Half-Bridge Driver
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





ISL78420 fiche technique
100V, 2A Peak, Half-Bridge Driver with Tri-Level PWM
Input and Adjustable Dead-Time
ISL78420
The ISL78420 is a 100V, high frequency, half-bridge MOSFET
driver with a tri-level PWM input. This part is a derivative of the
HIP2121 half-bridge driver. The non-automotive version of the
ISL78420 is the HIP2124.
This driver is designed to work in conjunction with the ISL78220,
“6-Phase Interleaved Boost PWM Controller with Light Load
Efficiency Enhancement”. Equally, it can be used in most
applications where a half-bridge driver is used.
This driver has a programmable dead-time to ensure
break-before-make operation between the high-side and low-side
drivers. A resistor is used to adjust the dead-time up to 220ns.
The tri-level input allows the PWM input to also function as a
disable input. When the PWM input is a logic high, the high-side
bridge FET is turned on and the low-side FET is off. When the
input is a logic low, the low-side bridge FET is turned on and the
high-side FET is turned off. When the input voltage is midrange,
both the high and low-side bridge FETs are turned off.
The enable pin (EN), when low, drives both outputs to a low state.
This input is used when the controller does not utilize a tri-state
output. All logic inputs are VDD tolerant.
Two package options are provided. The 10 Ld 4x4 DFN package
has standard pinouts. The 9 Ld 4x4 DFN package omits pin 2 to
comply with 100V conductor spacing per IPC-2221.
Features
• Programmable break-before-make dead-time prevents
shoot-through and is adjustable up to 220ns
• Bootstrap supply maximum voltage to 114VDC
• Wide supply voltage range (8V to 14V)
• Supply undervoltage protection
• On-chip 1Ω bootstrap diode
• Unique tri-level PWM input logic enables phase shedding when
using multi-phase PWM controllers (e.g. ISL78220/225)
• 9 Ld TDFN “B” package compliant with 100V conductor
spacing guidelines per IPC-2221
• AEC Q100 Qualified
Applications
• Automotive applications
• Multi-phase boost (ISL78220/225)
• Half-bridge DC/DC converter
• Class-D amplifiers
• Forward converter with active clamp
Related Literature
FN7668 HIP2120, HIP2121 “100V, 2A Peak, High Frequency
Half-Bridge Drivers with Adjustable Dead Time Control and
PWM Input”
FN8363 HIP2124, “100V, 2A Peak, Half Bridge Driver with
Tri-level Input and Adjustable Dead Time” (non-automotive)
FN7688 ISL78220, “6-Phase Interleaved Boost PWM
Controller with Light Load Efficiency Enhancement”
FN7909 ISL78225, “4-Phase Interleaved Boost PWM
Controller with Light Load Efficiency Enhancement”
HALF BRIDGE
ISL78420
VDD
HB
PWM
CONTROLLER
PWM
EN
RDT
HO
HS
VSS LO
EPAD
100V MAX
SECONDARY
CIRCUITS
FEEDBACK
WITH
ISOLATION
FIGURE 1. TYPICAL APPLICATION
200
160
140
120
100
80
60
40
20
8 16 24 32 40 48 56 64
RDT (kΩ)
FIGURE 2. DEAD-TIME vs TIMING RESISTOR
80
January 24, 2014
FN8296.2
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2012, 2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

PagesPages 16
Télécharger [ ISL78420 ]


Fiche technique recommandé

No Description détaillée Fabricant
ISL78420 Half-Bridge Driver Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche