|
|
PDF SMCJ16 Data sheet ( Hoja de datos )
| Número de pieza | SMCJ16 | |
| Descripción | TVS Diode (Transient Voltage Suppressor) | |
| Fabricantes | Galaxy Microelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMCJ16 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Production specification
TRANSIENT VOLTAGE SUPPRESSOR
SMCJ5.0--SMCJ188CA
FEATURES
z Glass passivated junction
z Low incremental surge resistance, excellent clamping capability
z Underwriters Laboratory Recognition under UL standard
for safety 497B: Isolated Loop Circuit Protection
z Low profile package with built-in strain relief for surface mounted applications
z 600W peak pulse power capability with a 10/1000μs
Wave form, repetition rate (duty cycle): 0.01%
z Very fast response time
z High temperature soldering guaranteed: 250°C/10 seconds at terminals
MECHANICAL DATA
z Case: JEDEC DO-214AA molded plastic over passivated chip
z Terminals: solder plated, solderable per MIL-STD-750, method 2026
z Polarity: foruni-directional types the color band denotes the cathode, which is postitive with respect to the
anode under normal TVS operation
z Mounting position: any Weight: 0.007 ounces, 0.21 grams
z Flammability: Epoxy is rated UL 94V-0
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both
directions.
Maximum Ratings and Thermal Characteristics
Characteristic
Peak power dissipation with a 10/1000μs waveform
(NOTE 1,2, FIG.1)
(TA=25℃ unless otherwise noted)
Symbol
Value
Unit
PPPM
Minimum 1500
W
Peak pulse current with a 10/1000μs waveform (NOTE 1)
IPPM
See Table Below
A
Typical thermal resistance, junction to ambient ( (NOTE 2)
Peak forward surge current, 8.3ms single half sine-wave uni-directional
only (NOTE 3)
R θ JA
IFSM
100.0
100.0
℃/W
A
Typical thermal resistance, junction to lead
R θJL
20 ℃/W
Operating junction and storage temperature range
TJ, TSTG
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2.
(2) Mounted on minimum recommended pad layout.
(3) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal.
-55---+150
℃
Document Number: SMC601AA
www.gmicroelec.com
1
1 page  
TRANSIENT VOLTAGE SUPPRESSOR
PACKAGE OUTLINE DIMENSIONS
Production specification
SMCJ5.0--SMCJ188CA
A
D
F
SMC
Dim Min Max
A 6.70 7.10
B 5.70 6.10
C
2.10
2.40
D
7.55
8.05
E 0.25Typical
F 1.00 1.60
G 0.20MAX
H
2.15
2.45
I 2.85 3.15
All Dimensions in mm
SOLDERING FOOTPRINT
Unit ：mm
PACKAGE INFORMATION
Device
Package
Shipping
SMCJ5.0--SMCJ188CA DO-214AB(SMC) 3000/Tape&Reel
Document Number: SMC601AA
www.gmicroelec.com
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet SMCJ16.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMCJ1.5KE100A | Transient Voltage Suppressor |  MCC |
| SMCJ1.5KE100CA | Transient Voltage Suppressor | MCC |
| SMCJ1.5KE10A | Transient Voltage Suppressor | MCC |
| SMCJ1.5KE10CA | Transient Voltage Suppressor | MCC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |