DataSheetWiki


SMCJ90A fiches techniques PDF

Galaxy Microelectronics - TVS Diode (Transient Voltage Suppressor)

Numéro de référence SMCJ90A
Description TVS Diode (Transient Voltage Suppressor)
Fabricant Galaxy Microelectronics 
Logo Galaxy Microelectronics 





1 Page

No Preview Available !





SMCJ90A fiche technique
Production specification
TRANSIENT VOLTAGE SUPPRESSOR
SMCJ5.0--SMCJ188CA
FEATURES
z Glass passivated junction
z Low incremental surge resistance, excellent clamping capability
z Underwriters Laboratory Recognition under UL standard
for safety 497B: Isolated Loop Circuit Protection
z Low profile package with built-in strain relief for surface mounted applications
z 600W peak pulse power capability with a 10/1000μs
Wave form, repetition rate (duty cycle): 0.01%
z Very fast response time
z High temperature soldering guaranteed: 250°C/10 seconds at terminals
MECHANICAL DATA
z Case: JEDEC DO-214AA molded plastic over passivated chip
z Terminals: solder plated, solderable per MIL-STD-750, method 2026
z Polarity: foruni-directional types the color band denotes the cathode, which is postitive with respect to the
anode under normal TVS operation
z Mounting position: any Weight: 0.007 ounces, 0.21 grams
z Flammability: Epoxy is rated UL 94V-0
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both
directions.
Maximum Ratings and Thermal Characteristics
Characteristic
Peak power dissipation with a 10/1000μs waveform
(NOTE 1,2, FIG.1)
(TA=25unless otherwise noted)
Symbol
Value
Unit
PPPM
Minimum 1500
W
Peak pulse current with a 10/1000μs waveform (NOTE 1)
IPPM
See Table Below
A
Typical thermal resistance, junction to ambient ( (NOTE 2)
Peak forward surge current, 8.3ms single half sine-wave uni-directional
only (NOTE 3)
R θ JA
IFSM
100.0
100.0
/W
A
Typical thermal resistance, junction to lead
R θJL
20 /W
Operating junction and storage temperature range
TJ, TSTG
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2.
(2) Mounted on minimum recommended pad layout.
(3) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal.
-55---+150
Document Number: SMC601AA
www.gmicroelec.com
1

PagesPages 6
Télécharger [ SMCJ90A ]


Fiche technique recommandé

No Description détaillée Fabricant
SMCJ90 UNIDIRECTIONAL AND BIDIRECTIONAL SURFACE MOUNT Microsemi Corporation
Microsemi Corporation
SMCJ90 SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR General Semiconductor
General Semiconductor
SMCJ90 Transient Voltage Suppressor 5.0 to 170 Volts 1500 Watt Micro Commercial Components
Micro Commercial Components
SMCJ90 Transient Voltage Suppressor 5.0 to 170 Volts 1500 Watt Micro Commercial Components
Micro Commercial Components

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche