DataSheetWiki


SEN01G64D1BF1SA-25R fiches techniques PDF

Swissbit - SDRAM SO-DIMM

Numéro de référence SEN01G64D1BF1SA-25R
Description SDRAM SO-DIMM
Fabricant Swissbit 
Logo Swissbit 





1 Page

No Preview Available !





SEN01G64D1BF1SA-25R fiche technique
Data Sheet
Rev.1.2 09.11.2010
1GB DDR2 SDRAM SO-DIMM
200 Pin SO-DIMM
SEN01G64D1BF1SA-30R
1GB PC2-6400 in FBGA Technology
RoHS compliant
Options:
Data Rate / Latency
DDR2 800 MT/s CL6
DDR2 667 MT/s CL5
Marking
-25
-30
Module density
1024MB with 8 dies and 1 rank
Standard Grade (TA)
(TC)
Grade E
(TA)
(TC)
Grade W
(TA)
(TC)
0°C to 70°C
0°C to 85°C
0°C to 85°C
0°C to 95°C
-40°C to 85°C
-40°C to 95°C
* The refresh rate has to be doubled when 85°C>TC>95°C
Environmental Requirements:
Operating temperature (ambient)
standard Grade
0°C to 70°C
Grade E
0°C to 85°C
Grade W
Operating Humidity
-40°C to 85°C
10% to 90% relative humidity, noncondensing
Operating Pressure
105 to 69 kPa (up to 10000 ft.)
Storage Temperature
-55°C to 100°C
Storage Humidity
5% to 95% relative humidity, noncondensing
Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
200-pin 64-bit Small Outline, Dual-In-Line Double
Data Rate Synchronous DRAM Module
Module organization: single rank 128M x 64
VDD = 1.8V ±0.1V, VDDQ 1.8V ±0.1V
1.8V I/O ( SSTL_18 compatible)
Auto Refresh (CBR) and Self Refresh 8k Refresh
every 64ms
Serial Presence Detect with EEPROM
Gold-contact pad
This module is fully pin and functional compatible to
the JEDEC PC2-6400 spec. and JEDEC- Standard
MO-224. (see www.jedec.org)
The pcb and all components are manufactured
according to the RoHS compliance specification
[EU Directive 2002/95/EC Restriction of Hazardous
Substances (RoHS)]
DDR2 - SDRAM component SAMSUNG
K4T1G084QF DIE Rev. F
128Mx8 DDR2 SDRAM in FBGA-60 package
Four bit prefetch architecture
DLL to align DQ and DQS transitions with CK
Eight internal device banks for concurrent operation
Programmable CAS latency (CL)
Posted CAS additive latency (AL)
WRITE latency = READ latency 1 tCK
Programmable burst length: 4 or 8
Adjustable data-output drive strength
On-die termination (ODT)
Figure: mechanical dimensions1
Swissbit AG
Industriestrasse 4
Ch-9552 Bronschhofen
1if no tolerances specified ± 0.15mm
Fon: +41 (0) 71 913 03 03
Fax: +41 (0) 71 913 03 15
www.swissbit.com
Page 1
of 14

PagesPages 14
Télécharger [ SEN01G64D1BF1SA-25R ]


Fiche technique recommandé

No Description détaillée Fabricant
SEN01G64D1BF1SA-25R SDRAM SO-DIMM Swissbit
Swissbit

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche