|
|
Numéro de référence | SGN01G64D2BG1SA-DCRT | ||
Description | SDRAM SO-DIMM | ||
Fabricant | Swissbit | ||
Logo | |||
Data Sheet
Rev.1.2 23.03.2012
1024MB DDR3 – SDRAM SO-DIMM
204 Pin SO-DIMM
Features:
SGN01G64D2BG1SA-xxRT
1GByte in FBGA Technology
RoHS compliant
Options:
Data Rate / Latency
DDR3 1066 MT/s CL7
DDR3 1333 MT/s CL9
DDR3 1600 MT/s CL11
Module Density
1024MB with 8 dies and 1 rank
Marking
-BB
-CC
-DC
204-pin 64-bit DDR3 Small Outline Dual-In-Line Double
Data Rate Synchronous DRAM module
Module organization: single rank 128M x 64
VDD = 1.5V ±0.075V, VDDQ 1.5V ±0.075V
1.5V I/O ( SSTL_15 compatible)
Fly-by-bus with termination for C/A & CLK bus
On-board I2C temperature sensor with integrated serial
presence-detect (SPD) EEPROM
Gold-contact pads
This module is fully pin and functional compatible to the
JEDEC PC3-12800 spec. and JEDEC- Standard MO-268.
(see www.jedec.org)
The pcb and all components are manufactured according
to the RoHS compliance specification [EU Directive
2002/95/EC Restriction of Hazardous Substances (RoHS)]
Standard Grade
Grade E
Grade W
(TA) 0°C to 70°C
(TC) 0°C to 85°C
(TA) 0°C to 85°C
(TC) 0°C to 95°C *)
(TA) -40°C to 85°C
DDR3 - SDRAM component Samsung K4B1G0846G
128Mx8 DDR3 SDRAM in PG-TFBGA-78 package
8-bit pre-fetch architecture
Programmable CAS Latency, CAS Write Latency, Additive
(TC) -40°C to 95°C *)
Latency, Burst Length and Burst Type.
On-Die-Termination (ODT) and Dynamic ODT for improved
*) The refresh rate has to be doubled when 85°C<TC<95°C*) The refsreigsnharal tientheagsrittoy.be doubled when 85°C<TC<95°C
Refresh. Self Refresh and Power Down Modes.
Environmental Requirements:
ZQ Calibration for output driver and ODT.
System Level Timing Calibration Support via Write Leveling
Operating temperature (ambient)
Standard Grade
0°C to 70°C
Grade E
0°C to 85°C
Grade W
Operating Humidity
-40°C to 85°C
10% to 90% relative humidity, noncondensing
Operating Pressure
105 to 69 kPa (up to 10000 ft.)
Storage Temperature
-55°C to 100°C
Storage Humidity
5% to 95% relative humidity, noncondensing
Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
and Multi Purpose Register (MPR) Read Pattern.
Figure: mechanical dimensions1
Swissbit AG
Industriestrasse 4
CH – 9552 Bronschhofen
Fon: +41 (0) 71 913 03 03
Fax: +41 (0) 71 913 03 15
1if no tolerances specified ± 0.15mm
www.swissbit.com
eMail: [email protected]
Page 1
of 17
|
|||
Pages | Pages 17 | ||
Télécharger | [ SGN01G64D2BG1SA-DCRT ] |
No | Description détaillée | Fabricant |
SGN01G64D2BG1SA-DCRT | SDRAM SO-DIMM | Swissbit |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |