DataSheetWiki


SMA5J26A fiches techniques PDF

Vishay - High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors

Numéro de référence SMA5J26A
Description High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
Fabricant Vishay 
Logo Vishay 





1 Page

No Preview Available !





SMA5J26A fiche technique
DO-214AC
(SMA)
SMA5J5.0 thru 40CA
New Product
Vishay Semiconductors
formerly General Semiconductor
High Power Density Surface Mount TRANSZORB®
Transient Voltage Suppressors Stand-off Voltage 5.0 to 40 V
Peak Pulse Power 500 W
Cathode Band
0.065 (1.65)
0.049 (1.25)
Dimensions in inches
and (millimeters)
0.090 (2.29)
0.078 (1.98)
0.177 (4.50)
0.157 (3.99)
0.110 (2.79)
0.100 (2.54)
0.012 (0.305)
0.006 (0.152)
Mounting Pad Layout
0.066 MIN.
(1.68 MIN.)
0.074 MAX.
(1.88 MAX.)
0.060 MIN.
(1.52 MIN.)
0.208
(5.28) REF
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.208 (5.28)
0.194 (4.93)
Mechanical Data
Case: JEDEC DO-214AC molded plastic over
passivated chip
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
250°C/10 seconds at terminals
Polarity: For uni-directional types the band denotes the
cathode, which is positive with respect to the anode
under normal TVS operation
Mounting Position: Any Weight: 0.002oz., 0.064g
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Ideal for ESD protection of data lines in
accordance with IEC 1000-4-2 (IEC801-2)
• Ideal for EFT protection of data lines in
accordance with IEC 1000-4-4 (IEC801-4)
• Low profile package with built-in strain relief for
surface mounted applications
• Glass passivated junction
• Low incremental surge resistance, excellent clamping
capability
• 500W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
• Very fast response time
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMA5J10CA). Electrical characteristics apply in both directions.
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
Peak pulse power dissipation with
a 10/1000µs waveform(1,2) (see fig. 1)
PPPM
Peak pulse current with a 10/1000µs waveform(1)
IPPM
Peak forward surge current 8.3ms single half sine-wave
uni-directional only(2)
IFSM
Typical thermal resistance, junction to ambient(3)
RθJA
Typical thermal resistance, junction to lead
RθJL
Operating junction and storage temperature range
TJ, TSTG
Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2
(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(3) Mounted on minimum recommended pad layout
500
See Next Table
40
80
25
–55 to +150
W
A
A
°C/W
°C/W
°C
Document Number 88875
11-Mar-04
www.vishay.com
1

PagesPages 4
Télécharger [ SMA5J26A ]


Fiche technique recommandé

No Description détaillée Fabricant
SMA5J26 High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors Vishay
Vishay
SMA5J26A High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors Vishay
Vishay

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche