DataSheetWiki


APXG200ARA181MH70G fiches techniques PDF

NIPPON CHEMI-CON - Conductive Polymer Aluminum Solid Capacitors

Numéro de référence APXG200ARA181MH70G
Description Conductive Polymer Aluminum Solid Capacitors
Fabricant NIPPON CHEMI-CON 
Logo NIPPON CHEMI-CON 





1 Page

No Preview Available !





APXG200ARA181MH70G fiche technique
Engineering Bulletin Tentative
No.819I/Apr.2013
Conductive Polymer
Aluminum Solid Capacitors
PXG-NPCAPTM
Series
●Super low ESR, high ripple current capability
●Rated voltage range : 16 to 25Vdc, Capacitance : 10 to 820μF
●Case size : 5×4.5L to 10×10L
RoHS Compliant
●Halogen Free
SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
Dissipation Factor
(tan)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
-55 to +105
16 to 25Vdc
±20% M
Rated voltage×1.15
Shall not exceed values shown in STANDARD RATINGS.
(at 20, 120Hz)
(at 105)
(at 20after 2 minutes)
0.12 max.
(at 20, 120Hz)
Z(-25) / Z(+20) ӌ 1.15
Z(-55) / Z(+20) ӌ 1.25
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20after the rated voltage is applied for 2,000 hours
(E46, F45 : 1,000 hours) at 105.
Bias Humidity
Surge Voltage
Appearance
No significant damage
Capacitance change ӌ ±20of the initial value
DF (tan)
ӌ 150of the initial specified value
ESR
ӌ 150of the initial specified value
Leakage current
ӌ The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20after subjecting them to the DC rated voltage at
60, 90 to 95% RH for 1,000 hours(E46, F45 : 500 hours) .
Appearance
No significant damage
Capacitance change ӌ ±20of the initial value
DF (tan)
ӌ 150of the initial specified value
ESR
ӌ 150of the initial specified value
Leakage current
ӌ The initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105for 30 seconds
Failure Rate
through a protective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds.
Appearance
No significant damage
Capacitance change ӌ ±20of the initial value
DF (tan)
ӌ 150of the initial specified value
ESR
ӌ 150of the initial specified value
Leakage current
ӌ The initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105.
ی DIMENSIONS䚷䠷mm
●Terminal Code : A
W
0.3max.
L±0.3(Note)
: L+0.1 / -0.2 for E46, F45
L±0.5 for HA0 and JA0
A±0.2
ی PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
A PXG A RA M G
Size Code D L A B C
W
E46 5 4.5 5.3 5.3 5.9 0.5 to 0.8
E61 5 5.8 5.3 5.3 5.9 0.5 to 0.8
F45 6.3 4.4 6.6 6.6 7.2 0.5 to 0.8
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8
H70 8 6.7 8.3 8.3 9.0 0.7 to 1.1
HA0 8 10.0 8.3 8.3 9.0 0.7 to 1.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1
P
1.4
1.4
1.9
1.9
3.1
3.1
4.5
MARKING
EX) 25V47μF
*  $

9
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47μF:470, 100μF:101)
Taping code
Terminal code
Voltage code (ex. 16V:160, 20V:200)
Series code
Category
Please contact us for mass production schedule.
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1656 1

PagesPages 2
Télécharger [ APXG200ARA181MH70G ]


Fiche technique recommandé

No Description détaillée Fabricant
APXG200ARA181MH70G Conductive Polymer Aluminum Solid Capacitors NIPPON CHEMI-CON
NIPPON CHEMI-CON

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche