|
|
PDF STR-KS360 Data sheet ( Hoja de datos )
| Número de pieza | STR-KS360 | |
| Descripción | MULTI CHANNEL AV RECEIVER SERVICE MANUAL | |
| Fabricantes | Sony | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STR-KS360 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
http://www.xiaoyu163.com
QQ STR-KS360/KS360SSE3RV7IC6E3M1AN5U1AL50
892498299
US Model
Ver. 1.0 2009.03
Canadian Model
STR-KS360/KS360S
AEP Model
UK Model
Australian Model
STR-KS360S
Photo: STR-KS360S
• STR-KS360 is the receiver section in US, Canadian models of HT-SS360.
• STR-KS360S is the receiver section in HT-SF360 and AEP, UK models of HT-SS360.
This receiver incorporates Dolby* Digital and
Pro Logic Surround and the DTS ** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
AUDIO POWER
SPECIFICATIONS
double-D symbol are trademarks of Dolby
Laboratories.
POWER OUTPUT AND TOTAL
** Manufactured under license under U.S.
Patent #’s: 5,451,942; 5,956, 674; 5,974,
380; 5,978,762; 6,487,535 & other U.S.
HARMONIC DISTORTION:
(Models of area code U, UC only)
With 3 ohm loads, both channels driven, from
and worldwide patents issued & pending.
DTS andDTS Digital Surround are
TEL 13942296513 QQregistered trademarks andtheDTSlogos
170 – 20,000 Hz; rated 84 watts per channel
minimum RMS power, with no more than 1%
total harmonic distortion from 250 milliwatts
to rated output.
and Symbol are trademarks of DTS, Inc. ©
1996-2008 DTS, Inc. All Rights Reserved.
This receiver incorporates High-Definition
Multimedia Interface (HDMI TM) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
“x.v.Color” and “x.v.Color” logo are
trademarks of Sony Corporation.
“BRAVIA” is a trademarks of Sony
Corporation.
“S-AIR” and its logo are trademarks of Sony
Corporation.
Amplifier section
Models of area code U, UC, CA
Power Output1)
Stereo mode (rated) 84 W + 84 W
(3 ohms at 170 –
20,000 Hz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz,
THD 10%)
FRONT2): 143 W/ch
CENTER2): 143 W
SUR2): 143 W/ch
(1.5 ohms at 70 Hz,
THD 10%)
SUBWOOFER2): 285 W
Models of area code CEL, CEK, AU
Power Output1)
Stereo mode (rated) 108 W + 108 W
(3 ohms at 1 kHz, T HD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THD 10%)
FRONT2): 143 W/ch
CENTER2): 143 W
SUR2): 143 W/ch
(1.5 ohms at 70 Hz,
THD 10%)
SUBWOOFER2): 285 W
SPECIFICATIONS
1)Measured under the following conditions:
Area code
Power requirements
U, UC, CA
CEL, CEK
AU
120 V AC, 60 Hz
230 V AC, 50 Hz
240 V AC, 50 Hz
General
Power requirements
Area code
Power requirements
U, UC, CA
CEL, CEK
120 V AC, 60 Hz
220 – 240 V AC, 50/60 Hz
2)Reference power output for front, center, surround
AU
240 V AC, 50 Hz
376315150 892498299speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
Power output (DIGITAL MEDIA PORT)
DC OUT:
5 V, 700 mA MAX
Inputs
Analog
Digital (Coaxial)
Tone
Sensitivity: 1 V/50 kohms
Impedance: 75 ohms
Power consumption
Area code
Power consumption
U, UC, CA, CEL,
CEK, AU
165 W
Gain levels
±10 dB, 0.5 dB step
Power consumption (during standby mode)
Reproduction frequency range:
28 – 20,000 Hz
0.3 W (When Control for
HDMI and S-AIR standby
are off)
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Dimensions (w/h/d) (Approx.)
17 × 2 5/8 × 13 1/8 inches
(430 × 66.5 × 333 mm)
including projecting parts
and controls
Mass (Approx.) 3.4 kg (7 lb 8 oz)
AM tuner section
Tuning range
Design and specifications are subject to
change without notice.
Area code
U, UC, CA, AU
CEL, CEK
Tuning scale
10 kHz step 9 kHz step
530 –
531 –
1,710 kHz 1,710 kHz
–
531 –
1,602 kHz
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
Antenna
Loop antenna
Intermediate frequency
450 kHz
Area code
SPEAKERS
FRONT R FRONT L SUR R
SUR L CENTER SUBWOOFER
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.
www x aoy u163 com. i9-889-446-01 Sony Corporation
MULTI CHANNEL AV RECEIVER
.
2009C05-1
Audio&Video Business Group
© 2009.03
Published by Sony Techno Create Corporation
http://www.xiaoyu163.com
1 page  
http://www.xiaoyu163.com
STR-KS360/KS360S
QQ 376315150Remotecommander
Basic operations
Remote Button Function
(US and Canadian models)
# /
Press to turn the receiver on
You can use the supplied remote
(on/standby) or off.
RM-AAU057 to operate the receiver and to
control the Sony audio/video components that
the remote is assigned to operate.
To turn off all Sony
components, press / and
AV / (") at the same
time (SYSTEM
STANDBY).
RM-AAU057
XT
XB
X
RM
RL
RK
RI
RH
TV
TV INPUT DMPORT AV
SYSTEM STANDBY
VIDEO1 VIDEO2 BD
DVD
SAT TV SA-CD/CD TUNER
BD/DVD
TOP MENU MENU
F1
F2
JUMP PICTURE WIDE FAVORITES
THEATER
123
GUIDE
456
SOUND
FIELD
789
CLEAR
DISPLAY
AMP MENU
0 ENTER
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
RETURN/EXIT
MENU/HOME
TV CH –
TV CH +
PRESET – REPLAY ADVANCE PRESET +
TUNING –
N
TUNING +
).
TV
9Y
R
RB
RT
RE
RG
Saving the power in
standby mode
– When “CONTROL FOR
HDMI” is set to “CTRL
ON” and “P.SAVE” is set
to “SAVE ON”.
– When S-AIR standby
“STBY” is set to “STBY
OFF”.
$ Input buttons
Press one of the buttons to
select the component you
want to use. The buttons are
factory assigned to control
Sony components.
( SOUND FIELD Press to select a sound field.
* AMP MENU
Press to display the menu of
the receiver.
, MUTING
Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound.
- MASTER VOL Press to adjust the volume.
+*/–
2
,
7/W/#/C
Press 7, W, # or C to select
the settings. Then, press
to enter the selection.
TEL 13942296513 QQ
892498299Tuner operations
Remote Button Function
Common operations
Remote Button Function
) ENTER
. MENU/HOME
/ PRESET +/–
TUNING +/–
2
,
7/W/#/C
3 DISPLAY
4 CLEAR
Press to enter the selection.
Press to display the menu.
Press to select a preset
station.
Press to scan the station.
Press to select the menu
items and to enter the
selection.
Press to display the
information during Tuner
function.
Press to clear a mistake
when you input a wrong
character.
" TV /
AV /
(on/standby)
) ENTER
5 Numeric
buttons
(number 5*)
Press to turn on or off the
Sony audio/video
components that the remote
is assigned to operate.
Press " / and # TV
//AV / at the same
time to turn off the receiver
and all other components
that the remote is assigned to
operate (SYSTEM
STANDBY).
Press to enter the selection.
Press to select channels and
tracks directly.
DMPORT operations
Remote Button Function
/ /
Press to skip the track.
N/.
Press to fast reverse or fast
forward.
)* (playback)/ Play mode button.
9 (pause, press
again to resume
normal playback/
Y (stop)
To control the component
1 Press one of the input buttons
$ (TV, BD, DVD, or SAT) to
select the component you want
to operate.
The component assigned to the selected
input button becomes operable.
2 Referring to the following table,
press the corresponding
button for the operation.
To control the TV
Press and hold (0) TV (yellow) button while
pressing the buttons with a yellow dot or
yellow printing to control the TV.
Remote Button Function
% FAVORITES
To display the stored favorite
channel list of TV.
WIDE
To select the wide picture
mode.
& THEATER
Press to sets the optimal
picture settings
automatically for watching
movies, when you connect a
Sony TV which is
compatible with the
THEATER button. Also, the
audio is automatically
switched to the audio output
of this receiver when you
connect the TV and the
receiver with HDMI
connection, and the Control
for HDMI function is set to
on.
' GUIDE
Press to display the guide
when you are watching
analog and digital channels.
376315150
+ TOOLS/
Press to enable you to access
OPTIONS
various viewing options and
change/make adjustments
892498299according to the source and
screen format.
Remote Button Function
, MUTING
Press to turn off the sound.
- TV VOL +/– Press to adjust the volume.
. MENU/HOME
Press to allow you to select
channels or input sources
and change the settings for
your TV.
/ TV CH +/–
Selects the next (+) or
previous (–) channel. To
scan quickly through
channels, press and hold
down either +/–.
1 RETURN/
EXIT
Press to return to the
previous screen of any
displayed menu.
2
,
7/W/#/C
Press to select the menu item
and enters the selection.
3 DISPLAY
Display the TV’s
information on the TV
screen. (Displays the current
channel number, etc.)
4 Selects digital channels
using with the 0-9 and
ENTER buttons. For
example, to enter “2.1”,
press 2 , , 1 and
ENTER.
To control the DVD recorder/Blu-ray
Disc recorder
Remote Button Function
% F1
Press to select the HDD.
F2 Press to select the Blu-ray
Disc/DVD.
. MENU/HOME Press to display the menu.
/
Press to skip chapters.
REPLAY
Press to jump backward
while viewing live or
recorded programs.
ADVANCE Press to jump forward while
viewing recorded programs.
Press to skip forward to the
next available chapter.
N/.
Press to fast reverse or to fast
forward the disc when
pressed during playback.
)* (playback)/ Play mode button.
9 (pause, press
again to resume
normal playback/
Y (stop)
2
,
7/W/#/C
Press to select a menu item
and enters the selection.
To control the DVD player/
Blu-ray Disc player
Remote Button Function
. MENU/HOME Press to display the menu.
/ /
Press to skip chapters.
REPLAY Press to jump backward.
ADVANCE Press to jump forward.
N/.
Press to fast reverse or to fast
forward the disc when
pressed during playback.
)* (playback)/ Play mode button.
9 (pause, press
again to resume
normal playback/
Y (stop)
2
,
7/W/#/C
Press to select a menu item
and enters the selection.
6 BD/DVD
TOP MENU,
MENU
Press to display the top menu
or disc menu.
To control the HDD/DVD COMBO
Remote Button Function
% F1
Press to select the HDD.
To control the SAT
Remote Button Function
' GUIDE
Press to display the guide
menu.
. MENU/HOME Press to display the menu.
2
,
7/W/#/C
Press to select a menu item
and enters the selection.
* The number 5, MASTER VOL + and ) buttons
have tactile dots. Use the tactile dots as references
when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
5 Numeric
buttons
(number 5*)
Press to select channels.
Press ENTER ()) to
change channels
6 BD/DVD
TOP MENU,
MENU
Press to display the top menu
or disc menu.
F2 Press to select the DVD.
. MENU/HOME Press to display the menu.
immediately.
/ /
Press to specify the
6 JUMP
To select the previous and
previous/next chapter/track.
the current channels of the
REPLAY Press to change to replay
TV, Satellite tuner, Blu-ray
mode.
disc recorder, DVD player.
ADVANCE Press to advance.
PICTURE
To cycle through the
available picture modes of
the TV.
N/.
Press to fast reverse or to fast
forward the disc when
pressed during playback.
7 TV INPUT
Press to select input.
)* (playback)/ Play mode button.
www.
xiaoy u163. com9(pause,press
again to resume
normal playback/
Y (stop)
2
,
7/W/#/C
Press to move the highlight
(cursor) and selects the item.
6 BD/DVD
Press to display the top menu
TOP MENU, or disc menu.
MENU
http://www.xiaoyu163.com
5
5 Page 
http://www.xiaoyu163.com
13. S-AIR TEST MODE (KS360S only)
Q Q 3 7 6 3 1 5 1 5 0Procedure:
17. COLD RESET
Procedure:
1. Enter the test mode menu.
1. Enter the test mode menu.
2. Press the [↑]/[↓] buttons to select “SAIR TST”, and press the
2. Press the [↑]/[↓] buttons to select “COLD RST”, and press the
[ENTER] button.
[ENTER] button.
3. S-AIR test menu is displayed.
3. The message “CLEARED” appears, then the set turns off.
4. Press the [?/1] button to exit from the test mode.
13-1. Power
Procedure:
1. Enter the S-AIR test mode.
2. Press the [↑]/[↓] buttons to select “POWER”, and press the
[ENTER] button.
3. The messages “000 SET” is appears.
4. Press the [↑]/[↓] buttons to select the output power. (OFF or
000 to 063)
5. Press the [ENTER] button, return to S-AIR test mode each
item.
13-2. NAMG
Procedure:
1. Enter the S-AIR test mode.
2. Press the [↑]/[↓] buttons to select “NAMG”, and press the
[ENTER] button.
3. The messages “116 SET” is appears.
4. Press the [↑]/[↓] buttons to select the NAMG setting value.
(107 to 117)
5. Press the [ENTER] button, return to S-AIR test mode each
item.
8FM AUTO STOP CHECK
signal
generator
set
9
SECTION 5
ELECTRICAL CHECK
2498
Procedure:
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
: 75 kHz
Modulation
: 1 kHz
ANT input
: 35 dBu (EMF)
Note: Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and scan the input FM signal with
automatic scanning.
4. Confirm that input frequency of A, B and C are detected and
automatic scanning stops.
When the station signal is received in good condition, automatic
scanning stops.
STR-KS360/KS360S
299
13-3. Version check
Procedure:
T E L 1 3 9 4 2 2 9 6 5 1 31. Enter the S-AIR test mode.
2. Press the [↑]/[↓] buttons to select “VER. CHECK”, and press
the [ENTER] button.
3. uCom software version of S-AIR product is displayed.
4. Press the [ENTER] button, return to S-AIR test mode each
item.
QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
13-4. Encryption key
Procedure:
1. Enter the S-AIR test mode.
2. Press the [↑]/[↓] buttons to select “ENC KEY”, and press the
[ENTER] button.
3. The on/off setting of the encryption key is displayed.
4. Press the [↑]/[↓] buttons to select the encryption key setting.
(ON or OFF)
5. Press the [ENTER] button, return to S-AIR test mode each
item.
14. S-AIR TEST ELEC MODE
Not used for the servicing.
Press the [?/1] button if having entered this mode.
15. UART FLASH (SOURCE)
Not used for the servicing.
Press the [?/1] button if having entered this mode.
16. UART FLASH (TARGET)
Not used for the servicing.
w w w .Press the [?/1] button if having entered this mode.
x ia o y u 1 6 3 .
com
STR-KS360/KS360S
11 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet STR-KS360.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STR-KS360 | MULTI CHANNEL AV RECEIVER SERVICE MANUAL | Sony |
| STR-KS360S | MULTI CHANNEL AV RECEIVER SERVICE MANUAL | Sony |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |