DataSheetWiki


FSBH0170W fiches techniques PDF

Fairchild Semiconductor - Green Mode Fairchild Power Switch

Numéro de référence FSBH0170W
Description Green Mode Fairchild Power Switch
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FSBH0170W fiche technique
June 2013
FSBH0F70WA, FSBH0170W, FSBH0270W
Green Mode Fairchild Power Switch (FPS™)
Features
Brownout Protection with Hysteresis
Built-In 5 ms Soft-Start Function
Internal Avalanche-Rugged 700 V SenseFET
Low Acoustic Noise During Light-Load Operation
High-Voltage Startup
Linearly Decreasing PWM Frequency to 18 KHz
Peak-Current-Mode Control
Cycle-by-Cycle Current Limiting
Leading-Edge Blanking (LEB)
Synchronized Slope Compensation
Internal Open-Loop Protection
VDD Under-Voltage Lockout (UVLO)
VDD Over-Voltage Protection (OVP)
Internal Auto-Restart Circuit (OVP, OTP)
Constant Power Limit (Full AC Input Range)
Internal OTP Sensor with Hysteresis
Applications
General-purpose switched-mode power supplies and
flyback power converters, including:
Au xiliary Power Supply for PC and Server
SMPS for VCR, SVR, STB, D VD & D VCD Player,
Printer, Facsimile, and Scanner
Adapter for Camcorder
Description
The highly integrated FSBH-series consists of an
integrated current-mode Pulse Width Modulator (PWM)
and an avalanche-rugged 700 V SenseFET. It is
specifically designed for high-performance offline
Switched-Mode Power Supplies (SMPS) with minimal
external components.
The integrated PWM controller features include a
proprietary green-mode function that provides off-time
modulation to linearly decrease the switching frequency
at light-load conditions to minimize standby power
consumption. To avoid acoustic-noise problems, the
minimum PWM frequency is set above 18 kHz. This
green-mode function enables the power supply to meet
international power conservation requirements. The
PWM controller is manufactured using the BiCMOS
process to further reduce power consumption. The
FSBH-series turns off some internal circuits to improve
power saving when VFB is lower than 1.6 V, which
allows an operating current of only 2.5 mA.
The FSBH-series has built-in synchronized slope
compensation to achieve stable peak-current-mode
control. The proprietary external line compensation
ensures constant output power limit over a wide AC
input voltage range, from 90 VAC to 264 VAC.
The FSBH-series provides many protection functions. In
addition to cycle-by-cycle current limiting, the internal
open-loop protection circuit ensures safety when an
open-loop or output short occurs. PWM output is
disabled until VDD drops below the VTH-OLP, then the
controller starts up again. As long as VDD exceeds 28 V,
the internal OVP circuit is triggered.
Compared with a discrete MOSFET and controller or
RCC switching converter solution, the FSBH-series
reduces component count, design size, and weight;
while increasing efficiency, productivity, and system
reliability. These devices provide a basic platform that is
well suited for the design of cost-effective flyback
converters, such as in PC auxiliary power supplies.
© 2011 Fairchild Semiconductor Corporation
FSBH0F70WA/0170W/0270W • Rev. 1.0.3
www.f airchildsemi.com

PagesPages 14
Télécharger [ FSBH0170W ]


Fiche technique recommandé

No Description détaillée Fabricant
FSBH0170 Green Mode Fairchild Power Switch Fairchild Semiconductor
Fairchild Semiconductor
FSBH0170 Green Mode Fairchild Power Switch Fairchild Semiconductor
Fairchild Semiconductor
FSBH0170-F116 Green Mode Fairchild Power Switch Fairchild Semiconductor
Fairchild Semiconductor
FSBH0170A Green Mode Fairchild Power Switch Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche