|
|
Número de pieza | ALM-32320 | |
Descripción | 3.3GHz - 3.9GHz 2 Watt High Linearity Amplifier | |
Fabricantes | AVAGO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ALM-32320 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! ALM-32320
3.3GHz – 3.9GHz
2 Watt High Linearity Amplifier
Data Sheet
Description
Avago Technologies’ ALM-32320 is a high linearity 2 Watt
PA with good OIP3 performance and exceptionally good
PAE at 1dB gain compression point, achieved through the
use of Avago Technologies’ proprietary 0.25um GaAs En-
hancement-mode pHEMT process.
All matching components are fully integrated within the
module. This makes the ALM-32320 extremely easy to use.
The adjustable temperature-compensated internal bias
circuit allows the device to be operated at either class A
or class AB operation. The ALM-32320 is housed inside a
miniature 7.0 x 10.0 x 1.1 mm3 20-lead multiple-chips-on-
board (MCOB) module package.
Component Image
7.0 x 10.0 x 1.1mm3 20-Lead MCOB Package
Vdd1 Vctrl
18 19
20
17 1
32320
WWYY
XXXX
Top View
16 2
15 3
RF OUT 14
4 RF IN
13 5
12 6
11 7
10 9
8
Vdd2 Not Used
Bottom View
Note:
Package marking provides orientation and identification
“32320” = Device Part Number
“WWYY” = Work week and year of manufacture
“XXXX” = Last 4 digit of lot number
Features
• Fully matched, input and output
• High linearity and P1dB
• Unconditionally stable across load condition
• Built-in adjustable temperature compensated internal
bias circuitry
• GaAs E-pHEMT Technology[1]
• 5V supply
• Excellent uniformity in product specifications
• Tape-and-Reel packaging option available
• MSL-3 and Lead-free
• High MTTF for base station application
Specifications
3.5GHz; 5V, 810mA (typical)
• 12.6 dB Gain
• 51.0 dBm Output IP3
• 34.5 dBm Output Power at 1dB Gain Compression
• 46.6% PAE at P1dB
• 2.5dB Noise Figure
Applications
• Class A driver amplifier for WiMAX base stations.
• General purpose gain block.
Note:
1. Enhancement mode technology employs positive gate voltage,
thereby eliminating the need of negative gate voltage associated
with conventional depletion mode devices.
2. Good RF practice requires all unused pins to be earthed.
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 80 V
ESD Human Body Model = 800 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
1 page 1,2
83
R4
To
A
To R3
R1
B
C3 C2
C5
C4 C1
Z1
50 -Ohms TL
Bias
Input
match
Output
match
50- Ohms TL
Module
C7 C6
C9
R2
C8 C10 Z2
BA
13
18
Note:
To supply Vdd1 and Vdd2 individually, remove R4 and supply Vdd1 from
pin 1,2 and Vdd2 from pin 19,20
Figure 6. Demo board application schematics and components table
Circuit Symbol
C1, C10
C2, C4, C9
C3, C5, C8
C6, C7
R1, R2
R3
R4
Z1, Z2
Size
0805
0402
0402
0402
1206
0402
0805
0805
Value
2.2uF
0.1uF
10nF
Not Used
0 Ohm
Not Used
0 Ohm
Not Used
Description
Ceramic Chip Capacitor
Ceramic Chip Capacitor
Ceramic Chip Capacitor
N/A
Chip Resistor
N/A
Chip Resistor
Zener Diode 5.6V
(Optional)
Demo board layout
Pins pointing out of the page
Unit is on top
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
Vdd 1 – Pin 1, 2
Vsense1 – Pin 3
Vdd 2 – Pin 19, 20 (optional)
Vsense2 – Pin 18 (optional)
Vctrl – Pin 8
Other pins are grounded
RF
input
10
Figure 7. Demo board layout diagram
1. Recommended PCB material is 10 mils Rogers RO4350, with FR4 backing for mechanical strength.
2. Suggested component values may vary according to layout and PCB material.
20 pin Connector
1
RF
output
5
5 Page Reel Dimensions - 13” Reel
ESD Label
(See Below)
Recycle Symbol
Detail ‘X’
Embossed Line X2 90.0mm Length
Lines 147.0mm away
from center point
Embossed ‘M’ 5.0mm Height
FRONT VIEW
Recycle Symbol
See Detail ‘X’
25.65±1.75**
25.4±1.0*
FRONT
BACK
Ø20.2 (Min)
Ø13.1
+0.5
-0.2
2.2±0.5
Detail ‘X’
BACK VIEW
Detail ‘Y’
Slot 10.0±0.5(2x)
Slot 5.0±0.5***(1x)
30.4*
Max
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-1350EN - April 5, 2012
1.0
4.0
Detail ‘Y’
(Slot Hole)
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet ALM-32320.PDF ] |
Número de pieza | Descripción | Fabricantes |
ALM-32320 | 3.3GHz - 3.9GHz 2 Watt High Linearity Amplifier | AVAGO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |