DataSheetWiki


UJB0L393THD fiches techniques PDF

Nichicon - Aluminum Electrolytic Capacitor

Numéro de référence UJB0L393THD
Description Aluminum Electrolytic Capacitor
Fabricant Nichicon 
Logo Nichicon 





1 Page

No Preview Available !





UJB0L393THD fiche technique
ALUMINUM ELECTROLYTIC CAPACITORS
JB Memory Back-Up Use
series
Developed for memory back-up, with load life of 1000 hours at +85°C.
Superior to electric double layer type capacitors in the following characteristics::
• Better voltage maintenance.
• Speedier charge-up available due to low impedance feature.
• Wider operating temperature range of – 25 to +85°C.
Compliant to the RoHS directive (2002/95/EC).
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Voltage Maintenance
StabiIity at Low Temperature
Performance Characteristics
25 to +85°C
5.5V
2.2 to 47mF
See Note 1
10 to +50%
C (µA) (C = Rated capacitance value in mF)
See Note 2
More than 3.5V
See Note 3
Capacitance (25°C) / Capacitance (20°C) × 100 70%
Impedance () MAX.
See Note 4
Capacitance (mF) 2.2 3.3 4.7 8.2 10 18 22 27 33 39 47
Impedance ()
1.5
1.0
0.6
0.3
0.3
0.2
0.2
0.2
0.2
0.1
0.1
Endurance
Shelf Life
Marking
The specifications listed at right shall be met
when the capacitors are restored to 20°C
after the rated voltage is applied for 1000
hours at 85°C.
Capacitance change Within ±30% of the initial capacitance value
Impedance
Within 4 times of the specified value
Leakage current
Less than or equal to the initial specified value
Voltage maintenance Satisfies the intial specified value
After storing the capacitors under no load at 85°C for 500 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the requirements for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
L+ MAX.
15MIN
4MIN
(mm)
φD 10 12.5 16 18
P 5.0 5.0 7.5 7.5
φd 0.6 0.6 0.8 0.8
(L < 20) 1.5
α (L 20) 2.0
Please refer to page 20 about the end seal configulation.
Note :
1. After charging a capacitor at the rated voltage of 5.5V for an hour, the capacitance is
calculated by the following formula, measuring the time of duration, T (Sec.) from
4V down to 3V when constant current dischage at i (mA) = 0.02 × nominal capacitance
is carried out.
Capacitance (mF) = i × T
2. Current value (20°C) after applying the rated voltage of 5.5V for an hour.
3. Voltage value maintained after the capacitor is subjected to 1 hour voltage application
at 5V and then left at room temperature (lower than 25°C) for 24 hours.
4. Measuring Frequency : 1kHz (20°C)
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Type numbering system (Example : 5.5V 10mF)
1 2 3 4 5 6 7 8 9 10 11
U J B 0 L 1 0 3 T HD
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
10 PD
12.5 to 18
HD
Configuration
Capacitance tolerance
(10 to +50%)
Rated capacitance (10mF)
Rated voltage (5.5V)
Series name
Type
Dimensions
Ratings (V—mF)
5.5 2.2
5.5 3.3
5.5 4.7
5.5 8.2
5.5 10
5.5 18
5.5 22
5.5 27
5.5 33
5.5 39
5.5 47
Code
0L222
0L332
0L472
0L822
0L103
0L183
0L223
0L273
0L333
0L393
0L473
Case Size φD × L (mm)
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
16 × 35.5
18 × 31.5
18 × 35.5
18 × 40
CAT.8100Z

PagesPages 1
Télécharger [ UJB0L393THD ]


Fiche technique recommandé

No Description détaillée Fabricant
UJB0L393THD Aluminum Electrolytic Capacitor Nichicon
Nichicon

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche