DataSheetWiki


XQ7VX980T fiches techniques PDF

Xilinx - Virtex-7 T and XT FPGAs

Numéro de référence XQ7VX980T
Description Virtex-7 T and XT FPGAs
Fabricant Xilinx 
Logo Xilinx 





1 Page

No Preview Available !





XQ7VX980T fiche technique
DS183 (v1.21) July 1, 2014
Virtex-7 T and XT FPGAs Data Sheet:
DC and AC Switching Characteristics
Product Specification
Introduction
Virtex®-7 T and XT FPGAs are available in -3, -2, -1, and
-2L speed grades, with -3 having the highest performance.
The -2L devices operate at VCCINT = 1.0V and are screened
for lower maximum static power. The speed specification of
a -2L device is the same as the -2 speed grade. The -2G
speed grade is available in devices utilizing Stacked Silicon
Interconnect (SSI) technology. The -2G speed grade
supports 12.5 Gb/s GTX or 13.1 Gb/s GTH transceivers as
well as the standard -2 speed grade specifications.
Virtex-7 T and XT FPGA DC and AC characteristics are
specified in commercial, extended, industrial, and military
temperature ranges. Except for the operating temperature
range or unless otherwise noted, all the DC and AC
electrical parameters are the same for a particular speed
grade (that is, the timing characteristics of a -1M speed
grade military device are the same as for a -1C speed grade
commercial device). However, only selected speed grades
and/or devices are available in each temperature range.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The
parameters included are common to popular designs and
typical applications.
Available device and package combinations can be found in:
7 Series FPGAs Overview (DS180)
Defense-Grade 7 Series FPGAs Overview (DS185)
This Virtex-7 T and XT FPGA data sheet, part of an overall
set of documentation on the 7 series FPGAs, is available on
the Xilinx website at www.xilinx.com/7.
DC Characteristics
Table 1: Absolute Maximum Ratings(1)
Symbol
Description
FPGA Logic
VCCINT
VCCAUX
VCCBRAM
VCCO
Internal supply voltage
Auxiliary supply voltage
Supply voltage for the block RAM memories
Output drivers supply voltage for 3.3V HR I/O banks
Output drivers supply voltage for 1.8V HP I/O banks
VCCAUX_IO
VREF
Auxiliary supply voltage
Input reference voltage
I/O input voltage for 3.3V HR I/O banks
VIN(2)(3)(4)
I/O input voltage for 1.8V HP I/O banks
I/O input voltage (when VCCO = 3.3V) for VREF and differential I/O standards except
TMDS_33(5)
VCCBATT
Key memory battery backup supply
GTX and GTH Transceivers
VMGTAVCC
VMGTAVTT
VMGTVCCAUX
VMGTREFCLK
Analog supply voltage for the GTX/GTH transmitter and receiver circuits
Analog supply voltage for the GTX/GTH transmitter and receiver termination circuits
Auxiliary analog Quad PLL (QPLL) voltage supply for the GTX/GTH transceivers
GTX/GTH transceiver reference clock absolute input voltage
Min Max Units
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.40
–0.55
–0.40
1.1
2.0
1.1
3.6
2.0
2.06
2.0
VCCO + 0.55
VCCO + 0.55
2.625
V
V
V
V
V
V
V
V
V
V
–0.5 2.0
V
–0.5 1.1
–0.5 1.32
–0.5 1.935
–0.5 1.32
V
V
V
V
© 2011–2014 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Kintex, Artix, Zynq, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx in the
United States and other countries. All other trademarks are the property of their respective owners.
DS183 (v1.21) July 1, 2014
Product Specification
www.xilinx.com
Send Feedback
1

PagesPages 30
Télécharger [ XQ7VX980T ]


Fiche technique recommandé

No Description détaillée Fabricant
XQ7VX980T Virtex-7 T and XT FPGAs Xilinx
Xilinx

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche