|
|
PDF M106-A6-G1 Data sheet ( Hoja de datos )
| Número de pieza | M106-A6-G1 | |
| Descripción | Contact Image Sensor Module | |
| Fabricantes | CMOS Sensor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de M106-A6-G1 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
Preliminary
Contact Image Sensor
(CIS) Module
Product Name
M106-A6-G1
Approval
Notes
CMOS Sensor Inc.
20045 Stevens Creek Blvd.,
Suite 1A
Cupertino, CA., 95014
Tel: (408) 366-2898
Fax: (408) 366-2698
Approved Checked Designed
Issued
December 4, 2003
Revision no.
All specifications of this device are subject to change without notice.
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698
1 page  
Electro-optical characteristics:
at f = 500 kHz, VDD = 5 V, Tint *(1) = 2.5 ms, λ*(2) = 570 nm, Ta*(3) = 25 °C
(unless otherwise noted)
symbol
Vp*(4)
Up*(5)
U *(6)
padj
Vd*(7)
Ud*(8)
MTF*(9)
γ*(10)
Parameter
Analog output voltage at white paper
White paper non-uniformity
Adjacent pixel non-uniformity
Analog output voltage at dark paper
Dark signal non-uniformity
Modulation transfer function
Linearity
test conditions
O.D. *(11) = 0.05 ~ 0.1
O.D. = 0.05 ~ 0.1
O.D. = 0.05 ~ 0.1
light off, O.D. = 0.8
light off, O.D. = 0.8
at 3.85 lp/mm*(12)
min.
1.4
-30
-25
-100
30
0.85
typ max
1.6 1.8
30
25
+100
200
1.1
unit
V
%
%
mV
mV
%
Definition:
1. Tint is an integration time. It is determined by the interval between two start pulses.
2. λ is a wavelength of the light source.
3. Ta is ambient temperature.
4. Vp = (Vpmax + Vpmin) / 2
where Vpmax is a maximum vo ltage of whole module on white document.
Vpmin is a minimum voltage of whole module on white document.
5. Up is a pixel - pixel photo response non- uniformity within whole module.
Up = [(Vpmax - Vpmin) / Vp] x 100%
6. Upadj = Max [|(Vp(i) - Vp(i+1)| / Vp(i)] x 100%
where Vp(i) is the video signal output of each pixel # i
Vp(i+1) is the video signal output of each pixel # (i+1)
7. Vd = (Vdmax + Vdmin) / 2
where Vdmax is a maximum dark signal on whole module.
Vdmin is a minimum dark voltage on whole module.
8. Ud = Vdmax - Vdmin
9. MTF = [(Vmax - Vmin) / (Vmax + Vmin)] x 100%
where Vmax is the maximum output voltage at 3.85 lp/mm document.
Vmin is the minimum output voltage at 3.85 lp/mm document.
10. γ = log[(V2-Vd) / (V1-Vd)] / log (E2/E1) or log [(V2 - Vd) / (V1 - Vd)] / log (T2/T1)
where V1 is the output voltage of E1 illumination or T1 integration time
V2 is the output voltage of E2 illumination or T2 integration time
at 10 ~ 90% of saturation conduction.
11. O.D. = optical density of the paper.
12. lp / mm = line pair per millimeter
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet M106-A6-G1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| M106-A6-G1 | Contact Image Sensor Module | CMOS Sensor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |