|
|
PDF V315B5-LE3 Data sheet ( Hoja de datos )
| Número de pieza | V315B5-LE3 | |
| Descripción | TFT LCD Module | |
| Fabricantes | CMI MEI | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de V315B5-LE3 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
ϭʳ Tentative Specification
Ϯʳ Preliminary Specification
ϭʳ Approval Specification
MODEL NO.: V315B5
SUFFIX: LE3
Customer:
APPROVED BY
Name / Title
Note
SIGNATURE
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
Checked By Prepared By
Chao-Chun Chung Vincent Chou Archer Chang
Version 1.0
1 DateΚDec. 20 ,2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page  
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V315B5- LE3 is a TFT Liquid Crystal Display module with LED Backlight unit and 1ch-LVDS interface. The
display diagonal is 31.5”. This module supports 1366 x 768 HDTV format and can display true 16.7M colors
(8-bit/color).
1.2 FEATURES
- Optimized Brightness 400 nits
- Contrast Ratio (5000:1)
- Fast Response Time (8.5ms)
- Color Saturation NTSC 72%
- HDTV (1366 x 768 pixels) resolution, HDTV format
- DE (Data Enable) Only Mode
- LVDS (Low Voltage Differential Signaling) Interface
- Viewing Angle: 176(H)/176(V) (CR>20) Super MVA Technology
- Color Reproduction (Nature Color)
- RoHS compliance
1.3 APPLICATION
-TFT LCD TVs
-Optimized Brightness, Multi-Media Displays
1.4 GENERAL SPECIFICATIONS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch(Sub Pixel)
Pixel Arrangement
Display Colors
Display Operation Mode
Surface Treatment
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal (H)
Module Size Vertical (V)
Weight
Depth (D)
Weight
Specification
697.685(H) x 392.2(V)
705.4(H) x 400 (V)
a-si TFT active matrix
1366x R.G.B. x 768
0.12125 (H) x 0.36375 (V)
RGB vertical stripe
16.7M
Transmissive mode / Normally Black
Anti-Glare coating (Haze 11%)
Hard Coating (3H)
Min.
734.4
432
9.8
30.7
Typ.
735.4
433
10.8
31.7
4300
Max.
736.4
434
11.8
32.7
Unit
mm
mm
-
pixel
mm
-
color
-
-
Note
(1)
-
-
-
-
-
-
(2)
Unit Note
mm Module Size
mm
mm To Rear
mm To Boss
g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth does not include connectors.
Version 1.0
5 DateΚDec. 20 ,2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page 
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION
3.2.1 LED LIGHT BARCHARACTERISTICS (Ta = 25 ± 2 ºC)
The backlight unit contains 2pcs light bar.
Parameter
Symbol
Min.
Value
Typ.
Max.
Unit
Note
Total Current (8 String)
If -
800 848 mA
One String Current
LED Forward Voltage
One String Voltage
One String Voltage Variation
Life time
IL
Vf
VW
ϦVW
-
-
2.7
32.4
-
30,000
100
3.2
-
-
-
106
3.6
43.2
2
-
mA
VDC IL =100mA
VDC IL =100mA
V
Hrs (1)
Note (1) The lifetime is defined as the time which luminance of the LED decays to 50% compared to the initial value,
Operating condition: Continuous operating at Ta = 25±2к, IL =100mA.
3.2.2 CONVERTER CHARACTERISTICS (Ta = 25 ± 2 ºC)
Parameter
Symbol
Min.
Value
Typ.
Max.
Unit
Note
Power Consumption PBL
-
34 38.4 W (1),(2) IL = 100 mA
Converter Input Voltage VBL
22.8
24
25.2
VDC
Converter Input Current IBL
-
1.4 1.6 A No Dimming
Input Inrush Current
-
-
VBL=24V,
- 2.2 A (IL=100mA)
(3)
Dimming Frequency
FB
150
160
170 Hz
Minimum Duty Ratio DMIN
5
10
-%
(4)
Note (1) The power supply capacity should be higher than the total converter power consumption PBL. Since
the pulse width modulation (PWM) mode was applied for backlight dimming, the driving current
changed as PWM duty on and off. The transient response of power supply should be considered for
the changing loading when converter dimming.
Note (2) The measurement condition of Max. value is based on 31.5" backlight unit under input voltage 24V,
average LED current 106 mA and lighting 1 hour later.
Note (3) The duration of Input Inrush Current is about 30ms.
Note (4) 5% minimum duty ratio is only valid for electrical operation.
Version 1.0
11 DateΚDec. 20 ,2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet V315B5-LE3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| V315B5-LE1 | TFT LCD Module | CMI MEI |
| V315B5-LE2 | TFT LCD Module | CMI MEI |
| V315B5-LE3 | TFT LCD Module | CMI MEI |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |