DataSheetWiki


30K5A1IC fiches techniques PDF

BetaTHERM - Chip Thermistors

Numéro de référence 30K5A1IC
Description Chip Thermistors
Fabricant BetaTHERM 
Logo BetaTHERM 





1 Page

No Preview Available !





30K5A1IC fiche technique
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated
Copper Lead Wires
With Etched
TFE Telfon Insulation,
Thermally Conductive
Epoxy Coating
12.7mm +/-3.3mm
(0.50Ó +/-0.13Ó)
76.2mm +/-3.3mm
(3.00Ó +/-3.13Ó)
2.413mm
(0.095Ó)
Max. Dia.
Example: BetaCURVE Series II Part Number
10K 3 A 1 I A
Tolerance Classification
Insulated Lead Wires
BetaCURVE Series
Epoxy Coated
Material Curve #
Resistance Value
@
25oC
Applications
¥ Temperature sensing, control and compensation.
¥ P.C. board mounting for over temperature
protection.
¥ Automotive car seat heater control and engine
management.
¥ Assembly into probes for a wide variety of
applications in industrial temperature control and
instrumentation.
Features
¥ Rapid Time Response (1 second typical in liquids).
¥ DC (Dissipation Constant) = 0.85mW/ oC
typical in still air at 25oC.
¥ Min./Max. Temperature Exposure = -80 to 150oC.
¥ Available in custom probe assemblies.
¥ Proven Stability and Reliability.
¥ Teflon Insulated lead wires.
¥ Choice of 4 temperature tolerance classifications:
Tolerance Code:
A
B
C
D
Specification:
+/-0.1oC, 0oC to 70oC
+/-0.2oC, 0oC to 70oC
+/-0.5oC, 0oC to 70oC
+/-1.0oC, 0oC to 70oC
Similar to the BetaCURVE Thermistor Series I, the
Series II thermistors are small epoxy coated devices. The
same quality thermistor elements are used during assembly.
Series II are manufactured using 30 AWG teflon insulated
lead wires. They offer the same choice of precision
temperature tolerance classifications for a wide variety of
customer applications.
The Series II differs from Series I marginally with
respect to D.C. The typical value of 0.85mW/oC in still air
at 25oC is due to the larger lead wire diameter made of pure
copper.
The insulated lead wires offer customers the added
protection of TFE teflon insulation that has the highest
temperature rating (150oC) of the most common insulating
materials. TFE teflon is a material that does not bond easily
with epoxies or adhesives. For this reason the surface of the
teflon wire is etched, which enhances bondability for
applications that require mounting or potting the thermistor
with epoxies or adhesives.
The series is produced in high volume as a
Standard configuration. Other configurations are available
on a custom basis. Larger or smaller lead wires can be used
with the same chip elements and with insulating materials of
PVC, Kynar, Tefzel, Nylon/Polyurethane, etc. Contact
Applications Engineering Group for support if requirements
differ from the standard configuration as shown above.
BETA ApS (DK + NO): Phone: +45 59 31 11 88, Fax: +45 59 31 12 10, email: [email protected]
4 BEATA Komponent AB (SE): Phone: +46 (0)392 360 40, Fax: +46 (0)392 360 41, e-mail: [email protected]
BETA Finland OY (FI): Phone: +358 (0)9 260 9209, Fax: +358 (0)9 260 9208, e-mai: [email protected]
url: www.beta.dk, www.beata.se, www.betafinland.fi, www.betatherm.com

PagesPages 2
Télécharger [ 30K5A1IC ]


Fiche technique recommandé

No Description détaillée Fabricant
30K5A1IA Chip Thermistors BetaTHERM
BetaTHERM
30K5A1IB Chip Thermistors BetaTHERM
BetaTHERM
30K5A1IC Chip Thermistors BetaTHERM
BetaTHERM
30K5A1ID Chip Thermistors BetaTHERM
BetaTHERM

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche