|
|
Datasheet L7296-50-PDF.HTML Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
L72 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | L7200 | MOZART/ 12V DISK DRIVE SPINDLE & VCM/ POWER & CONTROL COMBO L7200
MOZART, 12V DISK DRIVE SPINDLE & VCM, POWER & CONTROL “COMBO”
PRODUCT PREVIEW
GENERAL s 12V (+/- 10%) OPERATION. s REGISTER BASED ARCHITECTURE s MINIMUM EXTERNAL COMPONENTS s BCD TECHNOLOGY VCM DRIVER s 1.7A DRIVE CAPABILITY s 0.75Ω TOTAL BRIDGE IMPEDANCE AT 125°C s LINEAR MODE s PHASE  STMicroelectronics data | | |
| 2 | L7203 | SMOOTH DRIVE SPINDLE MOTOR FOR OPTICAL DRIVE APPLICATION WITH POWER INTEGRATED ®
L7203
SMOOTH DRIVE SPINDLE MOTOR FOR OPTICAL DRIVE APPLICATION WITH POWER INTEGRATED
SMOOTH DRIVE™ SYSTEM 1.8A DRIVE PEAK CAPABILITY SLEW RATE CONTROL INDUCTIVE SENSE START-UP ROUTINE THERMAL SHUTDOWN SUITABLE FOR 5V AND 12V APPLICATION ONLY ONE HALL SENSOR IS REQUIRED DESCRIPTION The L7203 S STMicroelectronics data | | |
| 3 | L7203S | SMOOTH DRIVE SPINDLE MOTOR FOR OPTICAL DRIVE APPLICATION WITH POWER INTEGRATED ®
L7203
SMOOTH DRIVE SPINDLE MOTOR FOR OPTICAL DRIVE APPLICATION WITH POWER INTEGRATED
SMOOTH DRIVE™ SYSTEM 1.8A DRIVE PEAK CAPABILITY SLEW RATE CONTROL INDUCTIVE SENSE START-UP ROUTINE THERMAL SHUTDOWN SUITABLE FOR 5V AND 12V APPLICATION ONLY ONE HALL SENSOR IS REQUIRED DESCRIPTION The L7203 S STMicroelectronics data | | |
| 4 | L7207 | Dual mode disk drive spindle and VCM motor driver L7207
Dual mode disk drive spindle and VCM motor driver
Data Brief
General features
■ ■ ■
Dual operative mode (Desktop and Mobile) Register based architecture Serial communication interface up to 40 MHz
■ ■ ■ ■ ■
Spindle driver
3A peak current drive capability STMicroelectronics driver | | |
| 5 | L7208 | Portable consumer electronics spindle and VCM motor controller L7208
Portable consumer electronics spindle and VCM motor controller
Data Brief
General features
■ ■ ■
Register Based Architecture 3 wire serial port up to 50MHz Ultra-thin package
■ ■ ■ ■ ■
Spindle driver
0.5A peak current drive capability Integrated power dr STMicroelectronics controller | | |
| 6 | L7250 | 5V & 12V SPINDLE AND VCM MOTORS DRIVER L7250
5V & 12V SPINDLE AND VCM MOTORS DRIVER
PRODUCT PREVIEW
s s s s
12V & 5V (±10%) OPERATION REGISTER BASED ARCHITECTURE 3 WIRE SERIAL COMMUNICATION INTERFACE UP TO 33 MHZ BCD TECHNOLOGY
TQFP64 ORDERING NUMBER: L7250
s s
Spindle Motor Controller s INTERNAL POWER DEVICE 0.9 OHM MAX VALUE @ 125° STMicroelectronics driver | | |
| 7 | L7292 | The best light source is supported by the best electrode technology Hamamatsu Corporation data | |
| Esta página es del resultado de búsqueda del L7296-50-PDF.HTML. Si pulsa el resultado de búsqueda de L7296-50-PDF.HTML se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |