|
|
PDF VSX-423-K Data sheet ( Hoja de datos )
| Número de pieza | VSX-423-K | |
| Descripción | AV Receiver Operating Instructions | |
| Fabricantes | Pioneer | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VSX-423-K (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
VSX-423-K /-S
AV Receiver
VSX-323-K
Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu).
Operating Instructions
1 page  
Before you start
Flow of settings on the receiver
Checking what’s in the box
Please check that you’ve received the following supplied
accessories:
• Setup microphone (VSX-423 only)
• Remote control
• AAA size IEC R03 dry cell batteries (to confirm system
operation) x2
• AM loop antenna
• FM wire antenna
• Power cord (For U.K. and Australia)
• Warranty card
• Quick start guide
• Safety Brochure
• SPEAKER CAUTION Sheet (English only)
• These operating instructions (CD-ROM)
Installing the receiver
• When installing this unit, make sure to put it on a level and
stable surface.
Don’t install it on the following places:
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device that gives off a
magnetic field). This may interfere with the sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is vibration or other movement
– in places that are very dusty
– in places that have hot fumes or oils (such as a kitchen)
The unit is a full-fledged AV receiver equipped with an
abundance of functions and terminals. It can be used easily
after following the procedure below to make the connections
and settings.
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
------------------------------------------
1 Connecting the speakers
Where you place the speakers will have a big effect on
the sound.
• Placing the speakers (page 10)
• Connecting the speakers (page 11)
2 Connecting the components
For surround sound, you’ll want to hook up using a
digital connection from the Blu-ray Disc/DVD player to
the receiver.
• About video outputs connection (page 13)
• Connecting a TV and playback components
(page 14)
• Connecting antennas (page 16)
• Plugging in the receiver (page 18)
3 Power On
Make sure you’ve set the video input on your TV to this
receiver. Check the manual that came with the TV if you
don’t know how to do this.
4 The Input Assign menu (page 35)
(When using connections other than the recommended
connections.)
The HDMI Setup menu (page 36)
(When the connected TV supports the HDMI Audio
Return Channel function.)
5 Use the on-screen automatic MCACC setup to set up
your system (VSX-423 only)
• Automatically setting up for surround sound
(MCACC) (page 19)
6 Basic playback (page 22)
• Selecting the audio input signal (page 22)
• Playing an iPod (page 24)
• Playing a USB device (page 25)
• Choosing the listening mode (page 29)
7 Adjusting the sound as desired
• Using the Sound Retriever (page 30)
• Better sound using Phase Control (page 31)
• Listening with Acoustic Calibration EQ (VSX-423
only) (page 30)
• Setting the Audio options (page 31)
• Manual speaker setup (page 33)
5
5 Page 
2
Connecting the speakers
The receiver will work with just two stereo speakers (the front speakers in the diagram) but
using at least three speakers is recommended, and a complete setup is best for surround
sound.
Make sure you connect the speaker on the right to the right (R) terminal and the speaker on the
left to the left (L) terminal. Also make sure the positive and negative (+/–) terminals on the
receiver match those on the speakers.
You can use speakers with a nominal impedance between 6 and 16 .
Be sure to complete all connections before connecting this unit to the AC power source.
Bare wire connections
Front speaker terminals:
1 Twist exposed wire strands together.
1
2 Loosen terminal and insert exposed wire.
3 Tighten terminal.
10 mm
2
3
Center and surround speaker terminals:
1 Twist exposed wire strands together.
2 Push open the tabs and insert exposed
wire.
3 Release the tabs.
1
10 mm
2
3
CAUTION
• These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting the speaker cables, disconnect the power cord
before touching any uninsulated parts.
• Make sure that all the bare speaker wire is twisted together and inserted fully into the
speaker terminal. If any of the bare speaker wire touches the back panel it may cause the
power to cut off as a safety measure.
Subwoofer
LINE LEVEL
INPUT
Front right
Connecting your equipment
Center
Front left
4
6
37
PREOUT
SUBWOOFER
FRONT
RL
Surround right
CENTER
Surround left
SURROUND
RL
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet VSX-423-K.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VSX-423-K | AV Receiver Operating Instructions | Pioneer |
| VSX-423-K | AV Receiver Quick Start Guide | Pioneer |
| VSX-423-S | AV Receiver Operating Instructions | Pioneer |
| VSX-423-S | AV Receiver Quick Start Guide | Pioneer |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |