DataSheetWiki


RClamp1654P fiches techniques PDF

Semtech Corporation - Low Capacitance TVS Array

Numéro de référence RClamp1654P
Description Low Capacitance TVS Array
Fabricant Semtech Corporation 
Logo Semtech Corporation 





1 Page

No Preview Available !





RClamp1654P fiche technique
PROTECTION PRODUCTS - RailClamp®
Description
RailClamp® is a low capacitance TVS array designed to
protect high speed data interfaces. This series has
been specifically designed to protect sensitive compo-
nents which are connected to data and transmission
lines from overvoltage caused by ESD (electrostatic
discharge), CDE (Cable Discharge Events), and EFT
(electrical fast transients).
The RClamp1654P is specifically designed to protect
portable devices that utilize the USB port for battery
charging. The unique design of this device features low
capacitance TVS diodes for protection of the USB data
(DP, DM) and USB ID (accessory detect) pins operating
up to 5 volts. Loading capacitance on these lines is
<1pF for maximum signal integrity. An integrated 12
volt TVS diode is used for protection of the USB
voltage bus. This ensures the device will remain in a
high-impedance state during normal USB operation or
when the battery is being charged. Leakage current of
the VBus protection is <50nA when operating at 12
volts.
The RClamp1654P is in a 6-pin, RoHS compliant,
SLP1616P6 package. It measures 1.6 x 1.6 x
0.60mm. The leads are spaced at a pitch of 0.5mm
and are finished with lead-free NiPdAu. They may be
used to meet the ESD immunity requirements of IEC
61000-4-2, Level 4 (15kV air, 8kV contact discharge).
RClamp1654P
RailClamp®
Low Capacitance TVS Array
Features
‹ Transient protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
‹ Array of surge rated diodes with internal TVS Diode
‹ Small package (1.6 x 1.6mm) saves board space
‹ Protects USB DP, DM, and ID Pin operating up to
5.5V
‹ Protects USB VBus operating up to 12V
‹ Low capacitance (<1pF) on DP, DM, and ID Pins
‹ Minimal insertion loss to 2.0GHz
‹ Low leakage current
‹ Low clamping voltage
‹ Large ground pad for increased ESD performance
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1616P6 6L package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.6 x 1.6 x 0.60 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code + two character date code
‹ Packaging : Tape and Reel
Applications
‹ USB 2.0
‹ USB OTG
Circuit Diagram
PIN Configuration
12
3
GND
Revision 11/07/2008
6
5.5V
12V
DM 1
6 VBus
DP 2 Gnd 5 NC
USB ID 3
4 NC
SLP1616P6 (Top View)
1 www.semtech.com

PagesPages 10
Télécharger [ RClamp1654P ]


Fiche technique recommandé

No Description détaillée Fabricant
RClamp1654P Low Capacitance TVS Array Semtech Corporation
Semtech Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche